Generated by All in One SEO v5.0.0.1, this is an llms.txt file, used by LLMs to index the site.

# P1 USA

Racers with Racing Solutions

## Sitemaps

- [XML Sitemap](https://p1australia.com/sitemap.xml): Contains all public & indexable URLs for this website.

## Posts

- [HM Heat Mat](https://p1australia.com/2021/02/15/hm-heat-mat/) - HM heat mat is designed to wrap around a 6″ oil tank with a simple hook & spring attachment with 3″ cable length. 110v & 240v options available. This mat is commonly used in Midget/Speedcar applications where the mat can fit neatly in between the tank mounting straps.
- [HMS Heat Mat](https://p1australia.com/2021/02/15/hms-heat-mat/) - HMS heat mat is designed to wrap around a 6″ oil tank with a simple hook & spring attachment with 3″ cable length. 110v & 240v options available This mat is commonly used in Sprintcar applications where the mat can fit in between the lower oil tank fitting and the lower mounting strap.
- [Stainless Steel Headers](https://p1australia.com/2021/02/15/stainless-steel-headers/) - Our stainless steel headers have been successful worldwide. Winning World of Outlaws, USAC and local weekly races. We work with leading performance engine builders and industry leaders to create a premium header that provides maximum performance. Maintaining high gas flow is essential for a performance race engine. Stainless steel headers will ensure maximum flow due
- [HMSP Heat Mat](https://p1australia.com/2021/02/15/hmsp-heat-mat/) - HMSP heat mat is designed to fit a BEAST pavement Silver Crown, Sprint or Midget oil tank. The mat will simply stick to the lower portion of the tank. 110v only available This mat can be stuck to the outside of the tank or if more protection is required (recommended) the inside (sandwiched in between
- [Truths about Engine Oil Heating](https://p1australia.com/2021/02/15/truths-about-engine-oil-heating/) - Why do I need to heat the engine oil? We have an engine heater so I don’t need to heat the oil. Heating an engine before use is great but it’s like only putting one shoe on! Only half the job is done! Sure any oil that is in the pan will get some heat
- [Shock 6 Pack](https://p1australia.com/2019/09/09/shock-6-pack/) - Exclusive CSI Shocks offer for V6 Wingless Sprintcars.With the ultra competitive competition in Australian Wingless racing, gaining an edge over the competition is vital. Why choose CSI Shocks by P1 Australia?All CSI Shocks are hand built and dyno tuned to exact specifications unlike many “mass produced” shocks. This means you get what you ask for!
- [BLACK Ti](https://p1australia.com/2021/02/10/black-ti-2/) - We have uploaded the 2021 BLACK Ti product guide. 37 NEW Part numbers!
- [Titanium Torsion Stops](https://p1australia.com/2021/02/10/titanium-torsion-stops/) - P1 Australia is now proudly supplying Titanium Torsion Bar Stops for Sprintcar, Midget/Speedcar & Micro 600/F500 cars. Contact us now!
- [Sander Tubular Torsion Bars](https://p1australia.com/2021/02/10/sander-tubular-torsion-bars/) - Sander Engineering 1″ Tubular Torsion Bars are now available at P1 Australia. Sander Torsion Bars have been winning races since 1979. Sander tubular torsion bars save about 3 pounds per bar. In addition, they react more quickly than solid torsion bars because they don’t have the center to slow their twisting motion. Sander has made the tubular bars bigger
- [BLACK Ti](https://p1australia.com/2021/02/10/black-ti/) - BLACK Ti is a specialty range of racing components developed by P1 Australia. Released at the 2019 Performance Racing Industry exhibition the range was met with much excitement by Racers amd Distributors. Please refer to the BLACK Ti section of the website for more information.

## Pages

- [Home](https://p1australia.com/) - EAT. SLEEP. RACE. REPEAT. Racing products tried and tested by Real Racers. For that competitive edge, P1 Australia is your solution. Sprint – Midget – Micro
- [2000 Series Engine Heater](https://p1australia.com/info/2000-series-engine-heater/) - 2000 Series Engine Heater Find all the technical information related to the 2000 series below. 2000 Series Installation Instructions A unique code is printed on the bottom of your engine heater that will identify which instructions to use. #092301 to #122335 use V6 instructions. #11240 and on use V7 instructions. 2000 Series Instructions V6 #092301
- [Simple 200 Series Engine Heater Test](https://p1australia.com/info/200-series-engine-heater/simple-engine-heater-test/) - Simple 200 Series Engine Heater Test If you think your heater is faulty here are two simple tests that can be done before returning to the manufacturer. Using a multimeter, set on the ohms scale, probe the three electrical plug terminals. Resistance will occur between the two active terminals, whilst zero resistance when testing the
- [About](https://p1australia.com/about/) - ABOUT Est. 2008 The company! P1 Australia founder Glenn Revell discovered traditionally Australian racers had a difficult time obtaining quality racing components for a reasonable price. Most racers stocked up on parts whilst holidaying in the USA in the off season. This prompted him to start designing and developing quality racing parts for the Australian
- [Error Code Identification – V6](https://p1australia.com/error-code-identification-v6/) - Error Code Identification - V6 Please watch the video of how the error code is displayed on a V6 heater. Each flash indicates a 1 value. 2 flashes equals error code 2 The video is displaying 6 flashes which means it is error code 6. Download Error codes V6
- [Error Code Identification - 2000 series V7](https://p1australia.com/error-code-identification-2000-series-v7/) - Error Code Identification Please watch the video of how the error code is displayed on a V7 heater. 0 = Fast flash 1 = Slow flash The code displayed is 01110 which means it is an E10 error code. Download Error codes V7
- [HMLS HEAT MAT](https://p1australia.com/oil-heat-mats/hmls-heat-mat/) - HMLS HEAT MAT This mat is designed specifically for wet sump engine applications. 3M adhesive on the back of the mat is used to apply the mat to the oil pan. 10″ x 6″ rectangular size with a 16″ cable length. 110v x 250w Caution when applying the mat that once the adhesive sticks it
- [HM57 HEAT MAT](https://p1australia.com/oil-heat-mats/hm57-heat-mat/) - HM57 HEAT MAT HM57 heat mat is designed like its bigger brother HMLS. The smaller size allows it to fit a multitude of applications. 3M adhesive on the back of the mat is used to apply the mat to the oil pan. 5″ x 7″ rectangular size with a 16″ cable length. 110v 140w Caution
- [HMS HEAT MAT](https://p1australia.com/oil-heat-mats/hms-heat-mat/) - HMS HEAT MAT​ This heat mat is designed to wrap around a 6″ oil tank with a simple hook & spring attachment. This mat is commonly used in Sprintcar applications where the mat can fit neatly in between the lower oil fitting outlet & the lower tank mounting strap. 17″ length x 3″ width, 6″
- [HM HEAT MAT](https://p1australia.com/oil-heat-mats/hm-heat-mat/) - HM HEAT MAT ​ This heat mat is designed to wrap around a 6″ oil tank with a simple hook & spring attachment with 16″ cable length. This mat is commonly used in Midget applications where the mat can fit neatly in between the tank mounting straps. 17″ length x 5″ width, 16″ length cable
- [Engine Heaters](https://p1australia.com/engine-heaters/) - Engine Heaters We have developed various engine heaters for the performance racing industry 200 Series – larger engines including V8 2000 Series – diesel powered self contained 200 SERIES 2000 SERIES May 2014 – P1 Australia commenced development of the 100 Series engine heater for Speedcar/Midget racing engines. The original design was released in October
- [BLACK Ti](https://p1australia.com/black-ti/) - BLACK Ti was released to the motorsports industry in December 2019 at the PRI show in Indianapolis. BLACK Ti, developed by P1 Australia, is a range of racing titanium components with a unique black coating. The black coating is similar to anodising used on aluminium. The coating is very durable and resists wear. The BLACK
- [Oil Heat Mats](https://p1australia.com/oil-heat-mats/) - Oil Heat Mats P1 Australia has designed a range of oil heat mats for dry and wet sump applications. Heating engine oil is essential for optimum engine performance. Please read “Truths about Engine Oil Heating” for a better understanding. All heat mats are now Black in colour with electrical specifications and plugs to suit Australia 240V or
- [Info](https://p1australia.com/info/) - Technical Information 200 Series 2000 Series Engine Heater Repair Form Oil Heat Mats
- [Oil Heat Mats TECH](https://p1australia.com/oil-heat-mats/oil-heat-mats-tech/) - Oil Heat Mats HM View More HMS View More HMLS View More HM57 View More
- [200 Series Engine Heater](https://p1australia.com/info/200-series-engine-heater/) - 200 Series Engine Heater Find all the technical information related to the 200 series below. USA 200 Series Installation Instructions View More USA 200 Series Installation Pictures View More 200 Series Installation Instructions Remote System View More 200 Series REMOTE Installation Pictures View More 200 Series MICRO Installation Pictures View More 200 Series Simple Engine
- [200 Series MICRO Installation Pictures](https://p1australia.com/info/200-series-engine-heater/200-series-micro-installation-pictures/) - 200 Series MICRO Installation Pictures
- [200 Series REMOTE Installation Pictures](https://p1australia.com/info/200-series-engine-heater/200-series-remote-installation-pictures/) - 200 Series REMOTE Installation Pictures Remote 200 Series Engine heater kit 200 Series Engine Heater Direction of Coolant Flow Heater can be connected via these ports. Core plug on side of the block (Yellow circle) is the preferred method. Remote heater mount PREFERRED mounting location for Billet remote mounting bracket. REAR engine plate LHS. This
- [USA 200 Series Installation Pictures](https://p1australia.com/info/200-series-engine-heater/usa-200-series-installation-pictures/) - USA 200 Series Installation Pictures Maxwell USA 200 Series In Car Heater 200 Series Coolant Flow Mounting panel with holes drilled. The circled points can be used on each side of the engine block to connect the engine heater hoses. Using this method will create a “loop” that will allow even heating temperature. Option #1
- [USA 200 Series Installation Instructions](https://p1australia.com/info/200-series-engine-heater/usa-200-series-installation-instructions/) - USA 200 Series Installation Instructions The P1 engine heater is designed to create cooling system temperature prior to starting the engine. It is not designed to heat the engine to normal operating temperature. Installation Instructions for 200 Series Engine Heater “IN CAR” Heater is to be installed on RH side panel behind front axle. Using
- [200 Series Installation Instructions Remote System](https://p1australia.com/info/200-series-engine-heater/200-series-installation-instructions-remote-system/) - 200 Series Installation Instructions The P1 engine heater is designed to create cooling system temperature prior to starting the engine. It is not designed to heat the engine to normal operating temperature. . The heater will circulate coolant continually whilst applied to the power source, although the internal thermostat will control the heating element allowing
- [Contact Us](https://p1australia.com/contact-us/) - Contact Name Phone Email Message Send
- [Engine Heater Repair Form](https://p1australia.com/info/engine-heater-repair-form/) - Engine Heater Repair Form The following information is required to process ALL Engine heater returns. Name Address Phone Email Message Date of Purchase Company Purchased from Copy of Purchase invoice Select Heater Series 100 Series200 Series2000 Series How many meetings has unit operated? Describe the heater fault Send Once the engine heater has been inspected
- [Become a P1 Dealer](https://p1australia.com/become-a-p1-dealer/) - Become a P1 Dealer Name Business Trading Name ABN / Business Number Address Phone Email Message Send
- [Stainless Headers](https://p1australia.com/headers/) - Stainless Steel Headers Our stainless steel headers have been successful worldwide. Winning World of Outlaws, USAC and local weekly races. We work with leading performance engine builders and industry leaders to create a premium header that provides maximum performance. Maintaining high gas flow is essential for a performance race engine. Stainless steel headers will ensure
- [Technical PDF Downloads](https://p1australia.com/technical-pdf-downloads/) - Order By:Publish DateTitleUpdate DateDownloadsViews Order:DescendingAscending Apply Filter 100 Series Kart Instructions 1 file(s) 155.21 KB Download 200 Series Installation USA 1 file(s) 138.77 KB Download 200 Series Remote Instructions 1 file(s) 139.66 KB Download HM Series heat mat instructions 1 file(s) 171.78 KB Download 2000 Series Instructions V4 1 file(s) 184 KB Download Fuel-Pump-Replacement-Instructions 1
- [Checkout](https://p1australia.com/checkout-2/)
- [Receipt](https://p1australia.com/checkout-2/receipt/)
- [Transaction Failed](https://p1australia.com/checkout-2/transaction-failed/) - Your transaction failed; please try again or contact site support.
- [Order History](https://p1australia.com/checkout-2/order-history/)
- [Confirmation](https://p1australia.com/checkout-2/confirmation/) - Thank you for your purchase!
- [FAQ](https://p1australia.com/info/faq/) - FAQ What are your Opening hours? 8.30am – 6.00pm EST I would like to talk to someone in person, how can I do it? Use any of the methods below and a sales assistant will contact you promptly Use the "Contact Us" form on the website home page Message us from our P1 Australia Facebook
- [Dealers](https://p1australia.com/dealers/) - Dealer Locations Your location Australia Germany USA Want to become a dealer? Become a P1 Dealer
- [100 Series Installation Instructions](https://p1australia.com/info/100-series-installation-instructions/) - 100 Series Installation Instructions 100 SERIES ENGINE HEATER The P1 Engine heater is designed to create cooling system temperature prior to starting the engine. It is not designed to heat the engine to normal operating temperature. The P1 engine heater will take approximately 45 minutes to heat a 4 cylinder aluminium engine. The P1 Engine
- [100 Series Installation Pictures](https://p1australia.com/info/100-series-installation-pictures/) - 100 Series Installation Pictures
- [Gallery](https://p1australia.com/gallary/) - Gallery Some of our customers in action All Silver Crown Sprintcars Midget Micro Legend Cars Race Tracks
- [100 Series KART Installation Instructions & Pictures](https://p1australia.com/info/100-series-kart-installation-instructions-pictures/) - 100 Series KART Installation Instructions & Pictures The P1 Engine heater is designed to create cooling system temperature prior to starting the engine. Starting High Performance engines in cold temperatures & operating at high RPM to achieve normal operating temperatures creates excessive wear, noise & smoke pollution. Costly engine damage can also occur. Pre-heating an
- [News](https://p1australia.com/news/) - News Stainless Steel Headers Our stainless steel headers have been successful worldwide. Winning World of Outlaws, USAC and local weekly races. We work with leading performance engine builders and Read More » HMSP Heat Mat HMSP heat mat is designed to fit a BEAST pavement Silver Crown, Sprint or Midget oil tank. The mat will
- [Shop](https://p1australia.com/shop/)

## Downloads

- [100 Series Kart Instructions](https://p1australia.com/download/100-series-kart-instructions/)
- [200 Series Installation USA](https://p1australia.com/download/200-series-installation-usa/)
- [200 Series Remote Instructions](https://p1australia.com/download/200-series-remote-instructions/)
- [HM Series heat mat instructions](https://p1australia.com/download/hm-series-heat-mat-instructions/)
- [2000 Series Instructions V4](https://p1australia.com/download/2000-series-instructions-v4/)
- [Fuel-Pump-Replacement-Instructions](https://p1australia.com/download/fuel-pump-replacement-instructions/)

## Products

- [Billet Birdcage Set Sprintcar](https://p1australia.com/product/billet-birdcage-set-sprintcar/) - *LIMITED TIME SALE* Sprintcar Birdcage set Complete with double row bearings, grease nipples, heavy duty top radius rod spacers & BLACK Ti fasteners. BLACK anodized. It's the attention to detail that sets these apart from others! ***Sale ends July 15th***
- [Shock mount Midget birdcage](https://p1australia.com/product/shock-mount-midget-birdcage/) - Add on shock clamp for P1 Australia Midget birdcages. Billet CNC Aluminium 4 x aluminium spacers to ensure correct shock absorber alignment BLACK Ti mounting bolts & black half nylock nuts Black anodised Birdcage not included
- [-6 Aluminium Quick Disconnect](https://p1australia.com/product/6-aluminium-quick-disconnect/) - -6 Quick Release Fitting Complete Dry break fittings ensure no leakage or air can enter the lines when disconnected. Black colour only
- [Rod End nut ALUMINIUM 5/8" LH](https://p1australia.com/product/rod-end-nut-aluminium-2/) - 5/8"-18 LH thread 3/4" hex 3/8" height BLACK aluminium
- [Rod End nut ALUMINIUM 5/8"](https://p1australia.com/product/rod-end-nut-aluminium/) - 5/8"-18 RH thread 3/4" hex 3/8" height BLACK aluminium
- [Rod End 2pc injected nylon 1/2" x 5/8"](https://p1australia.com/product/rod-end-2pc-injected-nylon-3/) - 1/2 x 5/8-18 thread LH thread BLACK anodized
- [Rod End 2pc injected nylon](https://p1australia.com/product/12-x-58-male-rod-end/) - 1/2 hole 5/8-18 thread RH BLACK anodized
- [SSH6 Stainless Steel 305 Sprint Header](https://p1australia.com/product/305-stainless-steel-header/) - ***NEW 2026 DESIGN*** Stainless cast flange with extra flange bolt clearance 1-5/8" - 1-3/4" Primary pipes 32" length 3" outlet Swept back design STD Chev flange Includes 1 set Gaskets Sold as a PAIR only Use with our specially designed BLACK Ti flange bolts TB3816075FEXH
- [SSH4 Stainless Steel 360 Sprint headers](https://p1australia.com/product/stainless-steel-sprint-headers-360/) - ***NEW 2026 DESIGN*** Stainless cast flange for perfect port alignment 1-3/4" - 1-7/8" Primary pipes 3-1/2" outlet Swept forward design for additional muffler clearance Includes 1 set Gaskets Sold as a PAIR only Use with our specially designed BLACK Ti stud mounting kit TSTH14N
- [Stainless Steel 410 Sprint headers Swept back](https://p1australia.com/product/stainless-steel-410-sprint-headers-swept-back/) - ***NEW 2026 DESIGN*** Stainless cast flange for perfect port alignment 1-7/8" - 2" Primary pipes 32" length 3-1/2" outlet x 16" length Swept back design Comes with 1 set gaskets Sold as a PAIR only
- [Oil Heat mat 3" wide](https://p1australia.com/product/oil-tank-heat-mat/) - 17-1/2" x 3" 180w 110v USA plug 6" length cable Simple spring/hook attachment. All mats are Black colour. Application: Sprintcar
- [Midget Torque Tube Assembly](https://p1australia.com/product/midget-torque-tube-assembly/) - 2.300" Tube diameter 22-1/2" length Black anodized Suitable for swivel spline rear ends
- [BLACK Ti Jacobs ladder assembly 13-3/8"](https://p1australia.com/product/black-ti-jacobs-ladder-assembly-13-3-8/) - 13-3/8” Length 3/8” clevis hole Complete with straps, ti bolts & nuts Application: Spike midget
- [BLACK Ti Jacobs ladder assembly 13-5/8"](https://p1australia.com/product/black-ti-jacobs-ladder-assembly-13-5-8/) - 13-5/8” Length ½” clevis hole Complete with straps, ti bolts & nuts Application: Sprint/Midget
- [BLACK Ti Jacobs ladder assembly 13-5/8" wide Spud](https://p1australia.com/product/black-ti-jacobs-ladder-assembly-13-5-8-wide-spud/) - 13-5/8” Length ½” clevis hole 1.400" wide spud Complete with straps, ti bolts & nuts Application: Midget LYNK, Bullet Designed for Keith Kunz Motorsports
- [Wheel Wrench Micro](https://p1australia.com/product/wheel-wrench-micro/) - Fits 2" hex nuts 12 point socket Aluminium Black anodized
- [7" Jacobs Ladder strap](https://p1australia.com/product/7-jacobs-ladder-strap/) - Jacobs Ladder Strap 7" 3/8" holes Black anodised Dog bone shape with lightening pocket
- [Alum Gear Oil Drain Tray](https://p1australia.com/product/gear-drain-tray/) - Easy pour Alum gear tray Dual handles Rolled front edge to prevent spillage Pour from either side Recommended Raw colour so you can see what debris is in the oil! Tray size 11-1/2" x 10" 4 quart capacity
- [BLACK Ti Flanged Hex head bolt 5/16-18 x 0.875"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-18-x-0-875/) - 5/16-18 thread 3/8” flanged hex head 0.875” length Application: Wheel centre
- [BLACK Ti King Pin Tether Stud](https://p1australia.com/product/black-ti-king-pin-tether-stud/) - King Pin Tether Stud 5/8 thread x 7/16 thread Use with BLACK Ti Part#TN716FN Fits popular tether straps.
- [BLACK Ti King Pin Sprint](https://p1australia.com/product/black-ti-king-pin-sprint/) - 0.859" diameter x 5.550" length BLACK Ti 7/16 Tether stud BLACK Ti 7/16 flanged nylock nut Application: Sprint *Please note that spindle bushes may require reaming to fit.*
- [Engine Heater Remote Fitting Kit](https://p1australia.com/product/engine-heater-remote-fitting-kit/) - This kit has all the pieces to set up a spare engine to use a remote engine heater. Includes: 1 x Billet Remote Mounting Bracket 2 x -8 Male Quick release fittings 2 x -8 dust plugs 2 x -8 O-ring port fittings
- [BLACK Ti Header Stud 3/8"-16-24](https://p1australia.com/product/black-ti-header-stud-3-8-16-24/) - 3/8-16 – 3/8-24 threads 5/32” Allen hex 1.250” O/A length Application: Sprint/Midget Header stud
- [-8 Blue Aluminium Quick Disconnect](https://p1australia.com/product/8-blue-aluminium-quick-disconnect-2/) - -8 Quick Release Fitting MALE half only BLUE colour Use with Part #BRCM to complete your remote engine heating system.
- [-8 Red Male Aluminium Quick Disconnect](https://p1australia.com/product/8-red-male-aluminium-quick-disconnect/) - -8 Quick Release Fitting MALE half only RED colour Use with Part #BRCM to complete your remote engine heating system.
- [Deluxe Bead Breaker 15"](https://p1australia.com/product/15-bead-breaker/) - 15" bead breaker Wide foot Black colour
- [Deluxe Bead Breaker 13"](https://p1australia.com/product/deluxe-bead-breaker-13/) - 13" bead breaker Wide foot Black colour
- [Billet Throttle cable bracket MICRO](https://p1australia.com/product/billet-throttle-cable-bracket-micro/) - Micro throttle cable bracket Aluminium Black anodized
- [Billet Inboard Brake Spacer](https://p1australia.com/product/billet-inboard-brake-spacer/) - Inboard floating brake rotor spacer Fits on axle between splined brake rotor and rear end Prevents rotor from moving Suits Midget 31 & 36 spline axles
- [Wheel Wrench Midget 36](https://p1australia.com/product/wheel-wrench-midget-36/) - 2-5/8" hex Suits 36 spline axles 6 point socket Aluminium Black anodized
- [Deluxe Bead Breaker 8"](https://p1australia.com/product/deluxe-bead-breaker-8/) - 8" bead breaker Wide foot Black colour
- [BLACK Ti Torque Tube Stud Kit 0.750"](https://p1australia.com/product/black-ti-torque-tube-stud-kit-0-750/) - 6pc KIT 3/8-16 – 3/8-24 threads 0.750" coarse thread length Application: Sprint/Midget Torque Tube Stud
- [Billet 3.00" Sprint Torque Ball](https://p1australia.com/product/billet-3-00-sprint-torque-ball/) - 7075 Billet Alum 3.00" tube size Lightening grooves Black anodised Suits: Sprint / Midget
- [BLACK Ti Stud 3/8"-16-24 1.00"](https://p1australia.com/product/black-ti-stud-3-8-16-24-1-00/) - 3/8-16 – 3/8-24 thread 5/32” Allen hex 1.00" coarse thread length Application: Sprint Torque Tube Stud
- [Torsion Bar Retainer](https://p1australia.com/product/torsion-bar-retainer/) - Torsion bar retainer suits 1" Schroeder bar 9/16" Hex head Aluminium Black anodised Sold as a pair.
- [BLACK Ti Magneto Cap Bolt kit](https://p1australia.com/product/black-ti-mag-clamp-bolt-kit/) - 4pcs kit 2 x 8/32 Allen bolts 2 x Retainer clips Replacement for MSD mag cap screws
- [Exhaust gasket ASCS 360 style](https://p1australia.com/product/exhaust-gasket-ascs-360-style/) - 0.080" thickness Metallic fiber composition Simple cut and fit Fits Brodix ASCS 360 spec heads Use with SSH4, SSH8 headers Sold individually
- [Exhaust gasket All Pro style](https://p1australia.com/product/exhaust-gasket-all-pro-style/) - 0.080" thickness Metallic fiber composition Simple cut and fit Fits common spread port heads Use with SSH2, SSH5 headers Sold individually
- [Exhaust gasket 305 Chev](https://p1australia.com/product/exhaust-gasket-305-chev/) - 0.080" thickness Metallic fiber composition Simple cut and fit Fits 305 std port chev heads Use with SSH6 headers Sold individually
- [BLACK Ti Flanged hex head bolt 5/16-18 x 0.500"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-18-x-0-500/) - 5/16-18 thread 3/8” Flanged hex head 0.500” length Full thread length Hex head drilled for lock wire Large diameter flange for extra surface area contact Application: Fuel cell mounting
- [BLACK Ti Fuel Cell Mounting Kit](https://p1australia.com/product/black-ti-fuel-cell-mounting-kit/) - 4pc KIT 5/16-18 threads 4 x flanged hex head bolts Hex heads drilled for lock wire Large diameter flange for extra surface area contact Application: Sprint/Midget fuel cell mounting
- [Thermal Wheel cover Kit MICRO](https://p1australia.com/product/thermal-wheel-cover-kit-micro/) - Thermal wheel cover kit 1 Left and 1 Right cover Outer zip to allow access for tyre pressure or bleeder adjustments. Inner edge easily fits over axle and secured with a velcro strap. Full coverage from sun and heat
- [Thermal Fuel tank cover MICRO](https://p1australia.com/product/thermal-fuel-tank-cover-micro/) - Designed to suit MICRO TANKS Top cap cut out 3 Velcro mounting straps
- [2000 Series Replacement battery](https://p1australia.com/product/2000-series-replacement-battery/) - 12v Lithium battery Wiring harness included This product can only be shipped Ground.
- [BLACK Ti Jacobs Ladder Pin Kit 1/2" Midget LynK](https://p1australia.com/product/black-ti-jacobs-ladder-pin-kit-1-2-midget-lynk/) - 2pcs TP3844350 1pc TP12115 2pcs RC38 1pc RC12 4pc S381375 2pcs AS38500 Use with ½” rod end in birdcage Application: Jacobs Ladder mounting kit Midget LynK
- [BLACK Ti Jacobs Ladder Pin Kit 3/8" Midget Spike](https://p1australia.com/product/black-ti-jacobs-ladder-pin-kit-3-8-midget-spike/) - 2pcs TP383360 1pc TP38115 3pcs RC38 4pcs S381375 Suit Midget Spike
- [BLACK Ti ONS 1/2 x 1.9475"](https://p1australia.com/product/black-ti-ons-1-2-x-1-9475/) - ½-20 threads 9/16” hex flat 1.9475” length 5/32” in hex to aid removal if required Application: Pitman / Steering arm Midget
- [BLACK Ti ONS 1/2 x 2.6375"](https://p1australia.com/product/black-ti-ons-1-2-x-2-6375/) - ½-20 threads 9/16” hex flat 0.550” spacer incorporated 2.6375” overall length Application: LR lower shock ONS Midget
- [BLACK Ti ONS 1/2 x 2.8875"](https://p1australia.com/product/black-ti-ons-1-2-x-2-8875/) - ½-20 threads 9/16” hex flat 0.800” spacer incorporated 2.8875” overall length Application: RR Lower shock ONS Midget
- [BLACK Ti Washer 5/16"](https://p1australia.com/product/black-ti-washer-5-16/) - 5/16 washer 0.610” OD 0.050” thick
- [BLACK Ti Washer 7/16"](https://p1australia.com/product/black-ti-washer-7-16/) - 7/16” washer 0.900” OD 0.060” thick Application: Rear end side cover Sprint
- [BLACK Ti Rear Side Hat Kit 7/16"](https://p1australia.com/product/black-ti-rear-side-hat-kit-7-16/) - 11pc KIT 11pcs TN716FN 11pcs TW716 Application: Rear End Side Hat Sprint
- [BLACK Ti Valve Cover Stud kit](https://p1australia.com/product/black-ti-valve-cover-stud-kit/) - 8pcs ¼-28 / ¼-20 stud 3/32" in hex for easy installation 8pcs ¼-28 flanged nut Application: Chevy Valve cover
- [BLACK Ti Header Stud kit with Flanged nuts](https://p1australia.com/product/black-ti-header-stud-kit-with-flanged-nuts/) - 14pcs 3/8-16 – 3/8-24 threads 5/32” in hex for easy installation 14pcs flanged nuts Application: Sprint headers
- [BLACK Ti Valve Cover Stud](https://p1australia.com/product/black-ti-valve-cover-stud/) - ¼-20 - ¼-28 threads 3/32” Allen hex 1.500” O/A length Application: Chevy valve cover
- [BLACK Ti Torque Tube Stud Kit with Flanged nuts & washers](https://p1australia.com/product/black-ti-torque-tube-stud-kit-with-flanged-nuts-washers/) - 18pc KIT 6pcs 3/8-16 – 3/8-24 threaded studs 6pcs Flanged nyloc nuts 6pcs BLACK Ti washers Application: Sprint / Midget torque tube
- [BLACK Ti ONS Sprint Shock Kit J&J](https://p1australia.com/product/black-ti-ons-sprint-shock-kit-jj/) - 8pc KIT ½-20 threads 6pcs TST12 2pcs TST1230875 Application: Sprint shock J&J
- [BLACK Ti LynK Midget Chassis Bolt Kit](https://p1australia.com/product/black-ti-lynk-midget-chassis-kit/) - Complete bolt kit suit LynK Midget chassis Click on the link below to see detailed bolt listing BTi LynK Midget Bolt Kit
- [BLACK Ti Spike Midget Chassis Bolt Kit](https://p1australia.com/product/black-ti-spike-midget-chassis-kit/) - Complete bolt kit suit Spike Midget chassis Click on the link below to see detailed bolt listing BTi Spike Midget Bolt Kit
- [Thermal Wheel cover Kit SPRINT](https://p1australia.com/product/thermal-wheel-cover-kit-sprint/) - Thermal Sprint wheel cover kit 1 Left and 1 Right cover Outer zip to allow access for tyre pressure or bleeder adjustments. Inner edge easily fits over axle and secured with a velcro strap. Full coverage from sun and heat
- [Thermal Fuel tank cover MIDGET](https://p1australia.com/product/thermal-fuel-tank-cover-midget/) - Designed to suit popular 19 gallon tanks Top cap cut out 2 Velcro mounting straps
- [Thermal Fuel tank cover SPRINT](https://p1australia.com/product/thermal-fuel-tank-cover-sprint/) - Designed to suit popular Sprint tanks Top cap cut out 2 Velcro mounting straps
- [Hood Blanket - Midget](https://p1australia.com/product/hood-blanket-midget/) - Light weight blanket with great insulation PU Leather outer cover with simple quick release restraining strap High strength polyester inner insulation Silicone rubber inner flaps resist burning from contact with hot headers Fire resistant thread Suits - Spike, Triple X, LynK
- [Exhaust gasket Stanton SR11 style](https://p1australia.com/product/exhaust-gasket-stanton-sr11-style/) - 0.080" thickness Metallic fiber composition Simple cut and fit Use with SSH9 headers Sold individually
- [Exhaust gasket Toyota 4 cylinder](https://p1australia.com/product/exhaust-gasket-toyota-4-cylinder/) - 0.080" thickness Metallic fiber composition Simple cut and fit Fits TRD 4-cylinder midget engine Use with SSH7 headers Sold individually
- [BLACK Ti Pin 3/8" x 1.350"](https://p1australia.com/product/black-ti-pin-3-8-x-1-350/) - 3/8” Pin 1.350” effective length Application: Micro Jacobs Ladder Chassis mount
- [BLACK Ti Pin 3/8" x 3.360"](https://p1australia.com/product/black-ti-pin-3-8-x-3-360/) - 3/8” Pin 3.360” effective length Application: Jacobs Ladder Chassis mount Midget Spike
- [BLACK Ti Pin 3/8" x 4.145"](https://p1australia.com/product/black-ti-pin-3-8-x-4-145/) - 3/8” Pin 4.145” effective length Application: Jacobs Ladder Chassis mount Sprint / Midget Bullet
- [BLACK Ti Pin 3/8" x 4.435"](https://p1australia.com/product/black-ti-pin-3-8-x-4-435/) - 3/8” Clevis Pin 4.435” effective length Application: Jacobs ladder chassis pin Midget LynK
- [BLACK Ti Flanged Hex head bolt 5/16 x 2.250"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-2-250/) - 5/16-24 thread 3/8” flanged hex head 2.250” length Application: Sprin / Midget Brake Pedal pivot bolt
- [BLACK Ti Flanged Hex head bolt 5/16 x 2.260"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-2-260/) - 5/16-24 thread 3/8” flanged hex head 2.600” length Application: Brake master cylinder side mount
- [BLACK Ti Flanged Hex head bolt 5/16 x 2.285"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-2-285/) - 5/16-24 thread 3/8” flanged hex head 2.850” length
- [BLACK Ti Flanged Hex head bolt 5/16 x 0.625"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-0-625/) - 5/16-24 thread 3/8” flanged hex head 0.625” length Application: Sprint S/S or Ti Wing post Front Front Aero strap to frame Front Aero strap to sideboard Front Aero strap to centre mount
- [BLACK Ti Flanged Hex head bolt 5/16 x 0.750"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-0-750/) - 5/16-24 thread 3/8” flanged hex head 0.750” length Application: Sprint Alum front wing post Top Front wing / rear strap to frame
- [BLACK Ti Flanged Hex head bolt 5/16 x 0.875"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-0-875/) - 5/16-24 thread 3/8” flanged hex head 0.875” length Application: Sprint Top Aero wing mount rear tab
- [BLACK Ti Countersunk bolt 7/16 x 1.00"](https://p1australia.com/product/black-ti-countersunk-bolt-7-16-x-1-00/) - 7/16-20 thread Countersunk head T40 torx 1.000” length Applications; Midget rear radius rod mounting plate
- [BLACK Ti Flanged hex head bolt 7/16 x 2.00"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-7-16-x-2-00/) - 7/16-20 thread 9/16 hex head 2.000” length Application: Micro radius rod
- [BLACK Ti Flanged hex head bolt 7/16 x 3.500"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-7-16-x-3-500/) - 7/16-20 thread 9/16 hex head 3.500” length Application: Micro LR radius rod / brake rod
- [BLACK Ti Flanged Hex head bolt 1/2 x 1.750"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-2-x-1-750/) - ½-20 thread 9/16” Flanged hex head 1.750” length Application: Midget LR upper shock LynK
- [BLACK Ti Flanged Hex head bolt 1/2 x 3.100"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-2-x-3-100/) - ½-20 thread 9/16” flanged hex head 3.100” length Application: Sprint top birdcage, Midget LF radius rod non threaded.
- [BLACK Ti Radius Rod kit Tether 9pcs](https://p1australia.com/product/black-ti-radius-rod-kit-tether-9pcs/) - 9pcs Kit ½-20 threads 4pcs ½ x 2.625 2pcs ½ x 3.375” 3pcs ½ x 1.250 3pcs ½ Flanged nylock nut Application: Sprint Radius Rod with Tethers
- [BLACK Ti SPRINT Steering Arm Kit](https://p1australia.com/product/black-ti-sprint-steering-arm-kit/) - 4pcs KIT 2pcs TB12150FD 2pcs TB12200CS Application: Sprint Steer Arm
- [BLACK Ti Alum nut 3/8-16](https://p1australia.com/product/black-ti-alum-nut-3-8-16/) - 3/8-16 ALUM nut 9/16 hex 0.19 thickness Application: MIDGET torsion stop adjuster
- [BLACK Ti Spring 3/8 x 1.375"](https://p1australia.com/product/black-ti-spring-3-8-x-1-375/) - 0.385 ID 1.417” length Stainless Steel Application: Jacobs ladder spacer
- [BLACK Ti SPRINT Engine Plate Kit](https://p1australia.com/product/black-ti-sprint-engine-plate-kit/) - 8pcs KIT 4pcs TB382375F 4pcs TN3824FN Application: Sprint Rear Engine Plate
- [BLACK Ti Fuel Cell Top Plate Dome Head Kit](https://p1australia.com/product/black-ti-fuel-cell-top-plate-dome-head-kit/) - 12pc KIT ¼-28 thread Application: Fuel Cell Top Plate Kit Dome allen head
- [BLACK Ti Nerf Bar Kit Midget](https://p1australia.com/product/black-ti-nerf-bar-kit-midget/) - 14pc KIT 14 x 10-32 flanged hex head bolts 14 x 10-32 nylock nuts Application: Midget Nerf Bar Kit
- [BLACK Ti Inboard Brake Rotor Midget](https://p1australia.com/product/black-ti-inboard-brake-rotor-midget/) - 6pcs KIT 6pcs TB516100UNCW 6pcs SN51618 Application: Midget inboard rotor mount
- [BLACK Ti Flanged nut 1/4-28](https://p1australia.com/product/black-ti-flanged-nut-1-4-28/) - 1/4-28 flanged nut 5/16 hex head
- [BLACK Ti Hex nut 3/8-16](https://p1australia.com/product/black-ti-hex-nut-3-8-16/) - 3/8-16 thread 9/16 hex
- [BLACK Ti Flanged nyloc nut 5/16-24](https://p1australia.com/product/black-ti-flanged-nyloc-nut-5-16-24/) - 5/16-24 Flanged nyloc half nut 3/8” hex
- [BLACK Ti Flanged nyloc nut 7/16-20](https://p1australia.com/product/black-ti-flanged-nyloc-nut-7-16-20/) - 7/16-20 thread 7/16 hex head
- [BLACK Ti Pin 3/8" x 0.9375"](https://p1australia.com/product/black-ti-pin-3-8-x-0-9375/) - 3/8” Pin 0.9375” effective length Application: Micro Jacobs Ladder rod end mount
- [BLACK Ti Flanged Hex head bolt 5/16 x 2.00"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-2-00/) - 5/16-24 thread 3/8” flanged hex head 2.000” length Application: Sprint / Midget Brake Pedal Rod End bolt, Midget Motor Plate bolt
- [BLACK Ti Flanged Hex head bolt 5/16 x 1.95"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-1-95/) - 5/16-24 thread 3/8” flanged hex head 1.950” length Application: Midget brake pedal pivot LynK
- [BLACK Ti Countersunk head bolt 5/16 x 2.00"](https://p1australia.com/product/black-ti-countersunk-head-bolt-5-16-x-2-00/) - 5/16-24 thread 2.000” O/A length Application: Midget Motor Plate
- [BLACK Ti Flanged Hex head bolt 3/8 x 1.00"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-1-00-2/) - 3/8-24 thread 7/16 hex head 1.00” length Application: Micro Shock bolt
- [BLACK Ti Flanged Hex head bolt 10-32 x 0.375"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-10-32-x-0-375/) - 10-32 thread 3/8” flanged hex head 0.375” length Application: Midget Floor Pan
- [BLACK Ti Flanged Hex head bolt 10/32 x 0.625"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-10-32-x-0-625/) - 10-32 thread 3/8” flanged hex head 0.625” length Application: Midget Throttle housing
- [BLACK Ti Flanged Hex head bolt 10/32 x 0.750"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-10-32-x-0-750/) - 10-32 thread 1/4” flanged hex head 0.750” length Application: Sprint Bell crank / linkage rod ends
- [BLACK Ti Flanged Hex head bolt 10/32 x 1.000" Reduced head](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-10-32-x-1-000-reduced-head/) - 10-32 thread 1/4” flanged hex head 1.000” length Application: Sprint bell crank rods
- [BLACK Ti Flanged Hex head bolt 10-32 x 1.250"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-10-32-x-1-250/) - 10-32 thread 3/8” flanged hex head 1.250” length Application: Torque tube hoop
- [BLACK Ti Flanged Hex head bolt 10-32 x 1.375"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-10-32-x-1-375/) - 10-32 thread 3/8” flanged hex head 1.375” length Application: Midget / Micro nerf bar
- [BLACK Ti Flanged Hex head bolt 1/4 x 1.00"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-4-x-1-00-2/) - ¼-28 thread 1/4” flanged hex head 1.000” length
- [BLACK Ti Flanged Hex head bolt 1/4-20 x 1.00"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-4-20-x-1-00/) - ¼-20 thread 5/16” flanged long hex head 1.000” length Application: Sprint/Midget Fuel Pump collar clamp
- [BLACK Ti Flanged Hex head bolt 1/4 x 0.750"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-4-x-0-750/) - ¼-28 thread 1/4” flanged hex head 0.750” length
- [BLACK Ti Dome head bolt 1/4 x 1.250"](https://p1australia.com/product/black-ti-dome-head-bolt-1-4-x-1-250/) - 1/4-28 thread Dome allen head 5/32” 1.250” length Application: Sprint/Midget/Micro Fuel cell top plate
- [BLACK Ti Dome head bolt 1/4 x 1.800"](https://p1australia.com/product/black-ti-dome-head-bolt-1-4-x-1-800/) - ¼-28 thread 1/4” flanged hex head 1.800” length Application: Sprint Bell crank pivot
- [BLACK Ti Flanged Hex head bolt 1/4 x 2.00"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-4-x-2-00/) - ¼-28 thread 5/16” flanged hex head 2.000” length
- [BLACK Ti Flanged Hex head bolt 1/4 x 2.250"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-4-x-2-250/) - ¼-28 thread 5/16” flanged hex head 2.250” length Application: Midget Gas Pedal LynK
- [BLACK Ti Flanged Hex head bolt 1/4 x 2.500"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-4-x-2-500/) - ¼-28 thread 5/16” flanged hex head 2.500” length Application: Midget Gas pedal pivot
- [BLACK Ti Flanged Hex head bolt 5/16 x 1.250"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-1-250/) - 5/16-24 thread 3/8” flanged hex head 1.250” length Application: Panhard clamp pinch bolt Midget
- [BLACK Ti Hex head bolt 5/16-18 x 1.250" Captive washer](https://p1australia.com/product/black-ti-hex-head-bolt-5-16-18-x-1-250-captive-washer/) - 5/16-18 thread ½” hex head 1.25” length Captive washer Application: Alternate beadlock bolt
- [BLACK Ti Flanged Hex head bolt 5/16 x 1.40"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-1-40/) - 5/16-24 thread 3/8” flanged hex head 1.40” length Application: Sprint Top wing socket
- [BLACK Ti Flanged Hex head bolt 5/16 x 1.50"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-1-50/) - 5/16-24 thread 3/8” flanged hex head 1.500” length Application: Sprint upper steering gear
- [BLACK Ti Flanged Hex head bolt 5/16 x 1.70"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-1-70/) - 5/16-24 thread 3/8” flanged hex head 0.375” thread length Application: Midget upper steering gear LynK
- [BLACK Ti Flanged Hex head bolt 5/16 x 1.75"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-1-75/) - 5/16-24 thread 3/8” flanged hex head 1.750” length Application: Midget Upper alum seat mount LynK
- [BLACK Ti Flanged Hex head bolt 5/16 x 1.875"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-5-16-x-1-875/) - 5/16-24 thread 3/8” flanged hex head 1.875” length Application: Midget upper Steering gear mount
- [BLACK Ti Flanged Hex head bolt 3/8 x 2.040"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-2-040/) - 3/8-24 thread 7/16” flanged hex head 2.040” length Application: Midget Pitman arm
- [BLACK Ti Flanged Hex head bolt 3/8 x 2.200"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-2-200/) - 3/8-24 thread 7/16” hex head 2.20” length Application: Midget LynK/Bullet jacobs ladder strap
- [BLACK Ti Flanged Hex head bolt 3/8 x 0.625"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-0-625/) - 3/8-24 thread 7/16” flanged hex head 0.625” length Application: Sprint Top Aero wing tree
- [BLACK Ti Flanged Hex head bolt 3/8 x 0.875"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-0-875/) - 3/8-24 thread 7/16” flanged hex head 0.875” length Application: Sprint wing
- [BLACK Ti Flanged Hex head bolt 3/8 x 0.500"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-0-500/) - 3/8-24 thread 7/16” flanged hex head 0.500” length Application: Micro shock
- [BLACK Ti Flanged Drilled Hex head bolt 3/8 x 1.250"](https://p1australia.com/product/black-ti-flanged-drilled-hex-head-bolt-3-8-x-1-250/) - 3/8-24 thread 7/16” Flanged hex head 1.250” length Hex head drilled for lock wire Application: Steering box clamp
- [Billet Torque Ball Housing](https://p1australia.com/product/billet-torque-ball-housing/) - 4.45" Ball Diameter Internal housing with extra clearance for u-joint Comes complete as pictured Billet alum housing Billet alum retainer Billet Alum hi-nuts Steel studs Black anodised Suits Sprint / Midget
- [Billet 2.3" Midget Torque Ball](https://p1australia.com/product/billet-2-3-torque-ball/) - 7075 Billet Alum 2.3" tube size Lightening grooves Black anodised Suits: Midget
- [21-1/2" Aluminium swaged rod 1" OD](https://p1australia.com/product/21-1-2-aluminium-swaged-rod-1-od/) - 21.5" long x 1"OD 5/8" left and right threads BLACK anodized
- [3/8" Alum Spacer](https://p1australia.com/product/3-8-alum-spacer/) - 3/8" ID 0.625" OD 0.500" Height Aluminium Black Anodized Commonly used as Jacobs Ladder spacer
- [Billet Steering Gear Mount w/Collar & LH Fuel](https://p1australia.com/product/billet-steering-gear-mount-w-collar-lh-fuel/) - Power Steering upper gear mount w/collar With Waterman style Fuel tap mount 5/16" mounting holes Aluminium Black anodised Suits Spike Midget
- [BLACK Ti Hex head bolt 3/8 x 1.350"](https://p1australia.com/product/black-ti-hex-head-bolt-3-8-x-1-350/) - 3/8-24 thread 9/16 Flanged hex head 1.350” length Application: BLACK Ti Torsion stop
- [BLACK Ti Hex head bolt 3/8 x 1.78"](https://p1australia.com/product/black-ti-hex-head-bolt-3-8-x-1-78/) - 3/8-16 thread 9/16 Flanged hex head 1.78” length Application: BLACK Ti Midget Torsion stop
- [BLACK Ti Flanged Hex head bolt 3/8 x 1.300"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-1-300/) - 3/8-24 thread 7/16” flanged hex head 1.300” length Application: Panhard clamp
- [BLACK Ti Flanged Hex head bolt 3/8 x 1.375"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-1-375/) - 3/8-24 thread 7/16” flanged hex head 1.375” length
- [BLACK Ti Flanged Hex head bolt 3/8-16 x 1.00"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-16-x-1-00/) - 3/8-16 thread 7/16” flanged hex head 1.000” length Application: Sprint Injector Manifold
- [BLACK Ti Flanged Hex head bolt 3/8-16 x 1.250"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-16-x-1-250/) - 3/8-16 thread 7/16” flanged hex head 1.250” length Application : Sprint/Midget Rear Engine Mount, Micro Steering Arm
- [BLACK Ti Flanged Drilled Hex head bolt 3/8-16 x 1.250"](https://p1australia.com/product/black-ti-flanged-drilled-hex-head-bolt-3-8-16-x-1-250/) - 3/8-16 thread 7/16 Flanged drilled hex head 1.250” length
- [BLACK Ti Flanged Hex head bolt 3/8 x 1.625"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-1-625/) - 3/8-24 thread 7/16 hex head 1.625” length Applications: Sprint P1 Birdcage flag retainer
- [BLACK Ti Flanged Hex head bolt 3/8-16 x 0.750"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-16-x-0-750/) - 3/8-16 thread 7/16” flanged hex head 0.750” length Application : Sprint/Midget Power Steer Pump
- [BLACK Ti Flanged Hex head bolt 3/8-16 x 0.875"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-16-x-0-875/) - 3/8-16 thread 7/16” flanged hex head 0.875” length Application: Sprint/Midget Torque ball Housing
- [BLACK Ti Flanged Hex head bolt 3/8 x 1.825"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-1-825/) - 3/8-24 thread 7/16 hex head 1.825” length Applications: Sprint brake pedal pivot
- [21" Aluminium swaged rod](https://p1australia.com/product/21-aluminium-swaged-rod-2/) - 21" long x 1-1/8"OD BLACK anodized
- [22" Aluminium swaged rod](https://p1australia.com/product/22-aluminium-swaged-rod/) - 22" long x 1-1/8"OD 5/8" left & right threads BLACK anodized
- [Axle Spacer Kit 31spl 4pcs 1/4"](https://p1australia.com/product/axle-spacer-kit-31spl-4pcs-1-4/) - 4pc axle spacer kit 31 spline axle 4 x 1/4" spacers
- [19" Aluminium swaged rod 1" OD](https://p1australia.com/product/19-aluminium-swaged-rod-1-od/) - 19" long x 1"OD 5/8" left and right threads BLACK anodized
- [21" Aluminium swaged rod 1" OD](https://p1australia.com/product/21-aluminium-swaged-rod-1-od/) - 21" long x 1"OD 5/8" left and right threads BLACK anodized
- [22-1/2" Aluminium swaged rod 1" OD](https://p1australia.com/product/22-1-2-aluminium-swaged-rod-1-od/) - 22-1/2" long x 1"OD 5/8" left and right threads BLACK anodized
- [28" Aluminium swaged rod](https://p1australia.com/product/28-aluminium-swaged-rod/) - 28" long x 1-1/8"OD BLACK anodized
- [Billet Steering Gear Mount w/Collar](https://p1australia.com/product/billet-steering-gear-mount-w-collar/) - Power Steering gear mount With collar 5/16" mounting holes Aluminium Black anodised Suits Spike midgets
- [Billet Steering Gear Mount w/Collar & Lower Fuel](https://p1australia.com/product/billet-steering-gear-mount-w-collar-fuel/) - Power Steering gear mount With collar & Fuel tap mount 5/16" mounting holes Aluminium Black anodised Suits Spike midgets
- [Billet Half Box Mount](https://p1australia.com/product/billet-half-box-mount/) - Billet Steering Half Box mount for KSE steering gear Notched loactors eliminate removal of circlip for quick and easy steering box replacement. Aluminium Black Anodised Suits Spike Midget
- [Billet Steering Gear Mount LH Fuel](https://p1australia.com/product/billet-steering-gear-mount-lh-fuel/) - Power Steering upper gear mount With Waterman style Fuel tap mount 5/16" mounting holes Aluminium Black anodised Suits Sprint / Midgets
- [Billet Steering Gear Mount w/Fuel](https://p1australia.com/product/billet-steering-gear-mount-w-fuel/) - Power Steering gear mount Lower Fuel tap mount 5/16" mounting holes Aluminium Black anodised Suits Sprint / Midgets
- [24" Gundrilled Driveshaft](https://p1australia.com/product/24-gundrilled-driveshaft/) - Gundrilled Hollow steel driveshaft 16-10 spline 24" length
- [29" Gundrilled Driveshaft](https://p1australia.com/product/29-gundrilled-driveshaft/) - Gundrilled Hollow steel driveshaft 16-10 spline 29" length
- [Billet Torsion Arm Midget Left Rear](https://p1australia.com/product/billet-torsion-arm/) - 1" Spline 13-1/4" bare arm length BLACK Ti fasteners included Black anodised 2024 Aluminium Suit LynK or Spike chassis
- [Billet Torsion Arm Midget Right Rear](https://p1australia.com/product/billet-torsion-arm-midget-right-rear/) - 1" Spline 12-3/4" bare arm length 3" offset BLACK Ti fasteners included Black anodised 2024 Aluminium Billet (NOT BENT) Suit LynK or Spike chassis
- [Billet Half Box Mount LynK](https://p1australia.com/product/billet-half-box-mount-lynk/) - Billet Steering Half Box mount for KSE steering gear Notched locators eliminate removal of circlip for quick and easy steering box replacement. Aluminium Black Anodised Suits LynK Midget
- [14-1/2" Aluminium swaged rod](https://p1australia.com/product/14-1-2-aluminium-swaged-rod/) - 14-1/2" long x 3/4"OD 3/8" threads BLACK anodized
- [15" Aluminium swaged rod](https://p1australia.com/product/15-aluminium-swaged-rod/) - 15" long x 3/4"OD 3/8" threads BLACK anodized
- [15-1/2" Aluminium swaged rod](https://p1australia.com/product/15-1-2-aluminium-swaged-rod/) - 15-1/2" long x 3/4"OD 3/8" threads BLACK anodized
- [20" Aluminium swaged rod](https://p1australia.com/product/20-aluminium-swaged-rod/) - 20" long x 7/8" OD 7/16" threads BLACK anodized
- [20-1/4" Aluminium swaged rod](https://p1australia.com/product/20-1-4-aluminium-swaged-rod/) - 20-1/4" long x 7/8" OD 7/16" threads BLACK anodized
- [20-1/2" Aluminium swaged rod](https://p1australia.com/product/20-1-2-aluminium-swaged-rod/) - 20-1/2" long x 7/8" OD 7/16" threads BLACK anodized
- [21" Aluminium swaged rod](https://p1australia.com/product/21-aluminium-swaged-rod/) - 21" long x 7/8" OD 7/16" threads BLACK anodized
- [21-1/4" Aluminium swaged rod](https://p1australia.com/product/21-1-4-aluminium-swaged-rod/) - 21-1/4" long x 7/8" OD 7/16" threads BLACK anodized
- [14" Aluminium swaged rod](https://p1australia.com/product/14-aluminium-swaged-rod/) - 14" long x 3/4" OD 3/8" threads BLACK anodized
- [30" Aluminium swaged rod](https://p1australia.com/product/30-aluminium-swaged-rod/) - 30" long x 1-1/8"OD BLACK anodized
- [Radius Rod Kit Midget Spike](https://p1australia.com/product/radius-rod-kit-midget-spike/) - Radius Rod Kit Midget Spike
- [COMPLETE Swedged Rod Car Kit Midget Spike](https://p1australia.com/product/complete-swedged-rod-car-kit-midget-spike/) - Kit consists: 1 x 19" Panhard 1 x 21-1/2" LF 2 x 23" RF 1 x 29-1/2" LR 1 x 31" RR 1 x 39" Draglink 1 x 41" Tie Rod 8 x 1/2" x 5/8" RH Alum rod ends & nuts 8 x 1/2" x 5/8" LH Alum rod ends & nuts All pcs BLACK
- [Wilwood Dynapro Caliper](https://p1australia.com/product/wilwood-dynapro-caliper-2/) - 2 x 1.750" diameter stainless pistons Suits 0.38" rotor thickness Aluminium Type III anodized 3.25" Lug mounting centres Pads not included (Part #WIL15Q6812) Suits: Sprint and Midget
- [Stainless Header Reducer](https://p1australia.com/product/stainless-header-reducer/) - Stainless header pipe reducer 3.5" down to 3.0" Weld or clamp Use with SSM5C muffler with 3.5" outlet on a 3" header pipe
- [Wilwood Compact Master Cylinder Flange Mount 7/8" Banjo](https://p1australia.com/product/wilwood-compact-master-cylinder-flange-mount-7-8-banjo/) - Compact Remote Master Cylinder 7/8" bore 3/8-24 banjo outlet Aluminium Black E-coated housing Reservoir mounting options included in kit
- [Stainless Header Turn Down](https://p1australia.com/product/stainless-header-turn-down/) - Stainless Header Turn Down Stainless steel turn down Slips over 3.5" header pipe Can be welded or secured with a clamp Directs heat away from rear tyres and shocks
- [Magnetic Drain Plug -6](https://p1australia.com/product/magnetic-drain-plug-6/) - -6 AN thread O'ring sealing Heavy Duty magnet Aircraft aluminium Black anodized Application: Oil pan drain plug
- [Magnetic Drain Plug -10](https://p1australia.com/product/magnetic-drain-plug-10/) - -10 AN thread O'ring sealing Heavy Duty magnet Aircraft aluminium Black anodized Application: Oil tank/pan drain plug
- [Billet Core Plug kit Chev](https://p1australia.com/product/billet-core-plug-kit-chev/) - 4pc kit 4 Aluminium plugs 8 Stainless steel retaining pins Core plug diameter 1.62" Use with #AN920-08-08 o'ring port fittings
- [Midget Wheel Nut Socket](https://p1australia.com/product/midget-wheel-nut-socket/) - Black anodised aluminium Standard Midget 2-1/4" Hex nut Suits 3/4" Hex drive impact wrenches
- [Micro Wheel Nut Socket](https://p1australia.com/product/micro-wheel-nut-socket/) - Black anodised aluminium Standard Micro 2" Hex nut Suits 1/2" Hex drive impact wrenches
- [SSH52 Stainless Steel 2" Sprint Header Swept back](https://p1australia.com/product/stainless-steel-2-sprint-header-swept-back/) - 2" Primary pipes 3-1/2" outlet Swept back design Sold as a PAIR only
- [2000 Series Engine heater](https://p1australia.com/product/2000-series-engine-heater/) - Kit comes with; 2000 Series engine heater 2 x -8 hoses with fittings 2 x -8 quick release fittings 2 x -8 dust boots Battery charger
- [Billet Steering Gear Mount](https://p1australia.com/product/billet-steering-gear-mount/) - Upper steering gear mount Fits KSE style power steering box Alum Black Anodize Specify 1/4" or 5/16" mounting holes Suit: Sprint or Midget
- [Sprint Wheel Nut Socket](https://p1australia.com/product/sprint-wheel-nut-socket/) - Black anodised aluminium Standard Sprint 3" Hex nut Suits 3/4" Hex drive impact wrenches
- [Radius Rod Kit SPRINTCAR](https://p1australia.com/product/radius-rod-kit-sprintcar/) - Kit consists: 1 x 18-1/2" 3 x 22-1/2" 1 x 23-1/2 1 x 24" 6 x 1/2" x 5/8" RH Alum rod ends & nuts 6 x 1/2" x 5/8" LH Alum rod ends & nuts All pcs BLACK
- [REVELL Steering Wheel 15"](https://p1australia.com/product/revell-steering-wheel-15/) - 15" diameter 1-1/8" rim thickness 3 x 5/16" holes on 1.750" PCD BLACK anodized Hand stitched cushioned BLACK PU leather cover Centre has slight dish for added strength and sits flush with outer rim Supplied with 3 BLACK Ti mounting bolts
- [Hood Blanket - Sprint](https://p1australia.com/product/hood-blanket-sprint/) - Light weight blanket with great insulation PU Leather outer cover with simple quick release restraining strap High strength polyester inner insulation Silicone rubber inner flaps resist burning from contact with headers Fire resistant thread Suits - Sprintcar
- [Deluxe Bead Breaker 10"](https://p1australia.com/product/deluxe-bead-breaker-10/) - 10" bead breaker Wide foot Black colour
- [BLACK Ti Flanged Hex head bolt 3/8-16 x 1.75"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-16-x-1-75/) - 3/8-16 thread 7/16 flanged hex head 1.750” length Hex head drilled for lock wire Application: Midget Radial Mount brake bracket
- [Assembly Lubricant 1oz tube](https://p1australia.com/product/assembly-lubricant-1oz-tube/) - Torco assembly lube 1oz tube Recommended lubricant for all BLACK Ti fasteners. Excellent adhesion properties and will not run or drip off parts. Great for use on torsion bar bushes and torque ball housing.
- [Assembly Lubricant 4oz bottle](https://p1australia.com/product/assembly-lubricant-4oz-bottle/) - Torco assembly lube 4oz bottle Recommended lubricant for all BLACK Ti fasteners. Excellent adhesion properties and will not run or drip off parts. Great for use on torsion bar bushes and torque ball housing.
- [REVELL Steering Wheel 15" Dished](https://p1australia.com/product/revell-steering-wheel-15-dished/) - 15" diameter 2" dish 1-1/8" rim thickness 3 x 5/16" holes on 1.750" PCD BLACK anodized Hand stitched cushioned BLACK PU leather cover Supplied with 3 BLACK Ti mounting bolts
- [REVELL Steering Wheel 13" Dished](https://p1australia.com/product/revell-steering-wheel-13-dished/) - 13" diameter 2" Dish 1-1/8" rim thickness 3 x 5/16" holes on 1.750" PCD BLACK anodized Hand stitched cushioned BLACK PU leather cover Supplied with 3 BLACK Ti mounting bolts
- [Billet Fuel Cell Clamp](https://p1australia.com/product/billet-fuel-cell-clamp/) - Billet aluminium Black Anodized 1-3/8" clamp size Sold as a pair These clamps easily allow positioning of the tank to chassis Suits Sprint and Midget
- [Fuel Cell Inner Mounting Plate](https://p1australia.com/product/fuel-cell-inner-mounting-plate/) - Black coated steel 3-1/4" x 1-1/2" All fasteners included Sold as a pair
- [Billet Rock Screen Clamp](https://p1australia.com/product/billet-rock-screen-clamp/) - Billet Alum CNC machined clamp 1-3/8" ID Black anodized Application: Sprint / Midget
- [Wilwood Compact Master Cylinder Side Mount 7/8"](https://p1australia.com/product/wilwood-compact-master-cylinder-side-mount-7-8/) - Compact Remote Master Cylinder 7/8" bore 1/8 NPT outlet Aluminium Black E-coated housing Reservoir mounting options included in kit
- [Wilwood Rotor 10.5" Super Alloy](https://p1australia.com/product/wilwood-rotor-10-5-super-alloy/) - 10.5" rotor diameter 0.78" rotor width 6 x 5.50" rotor bolt circle 0.326" mounting holes Super Alloy, Scalloped & Drilled Weighs 3.2lbs (1.45kg)
- [Wilwood Dynalite Caliper Radial Mount](https://p1australia.com/product/wilwood-dynalite-caliper-radial-mount/) - 4 x 1.750" diameter stainless pistons 4.75" Mounting centres Suits 0.75 - 0.81" rotor thickness Side inlet Aluminium Type III anodized Pads not included Suits: Sprint & Midget
- [Wilwood Inboard Caliper Radial Mount Midget](https://p1australia.com/product/wilwood-inboard-caliper-radial-mount/) - Suits 10.5" rotor diameter 4.75" mounting centres 3/8"-24 stud threads Aluminium Use with WIL12013406SI caliper Suits: Midget
- [Spark Plug Cover Kit](https://p1australia.com/product/spark-plug-cover-kit/) - Don't let rocks or debris put you out of another race from breaking a spark plug. Fits popular Sprintcar cylinder heads including All Pro, Brodix GB and Brodix -12 with spread port exhaust flange. Included in kit; 2 x aluminium covers right and left 4 x mounting brackets with dzus springs installed 4 x black dzus buttons Black anodized aluminium
- [Billet Panhard Clamp](https://p1australia.com/product/billet-panhard-clamp/) - Fits 1-1/8" tubing BLACK Ti fasteners included Aluminium Black anodized Suits: Midget
- [BLACK Ti Flanged Hex head bolt 3/8-16 x 1.125"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-16-x-1-125/) - 3/8-16 thread 7/16 hex head 1.125” length Hex head drilled for lock wire Applications: Midget inboard caliper mount
- [Oil Heat mat Stick on](https://p1australia.com/product/oil-heat-mat-stick-on/) - 9.84" x 6.30" 250w 110v USA plug 15.75" length cable Super strong 3M adhesive allows the mat to easily stick to the oil pan. Perfect for wet sump engines! All mats are Black colour
- [Billet Bleeder Valve Housing](https://p1australia.com/product/billet-bleeder-valve-housing/) - Billet Bleeder Valve Housing Complete assembly with rubber grommet, washers & retaining nut Black anodized aluminium
- [Billet Bleeder Housing Inflation Fitting](https://p1australia.com/product/billet-bleeder-housing-inflation-fitting/) - Billet Inflation valve Inserts into bleeder housing to inflate tires Black Anodized aluminium Sold individually
- [Bleeder Valve Housing Rubber Grommet](https://p1australia.com/product/bleeder-valve-housing-rubber-grommet/) - Billet Bleeder Valve Housing Rubber Grommet Replacement rubber grommet to suit BBVH Sold individually
- [Stainless Steel Muffler 3-1/2"](https://p1australia.com/product/stainless-steel-muffler-3-1-2/) - 14" length 4-1/2" diameter housing 3-1/2" expanded inlet 3-1/2" outlet Stainless clamp included Sold individually
- [Stainless Muffler Clamp 3-1/2"](https://p1australia.com/product/stainless-muffler-clamp-3-1-2/) - Lightweight Stainless muffler clamp Suits 3-1/2" muffler size
- [Wilwood Compact Master Cylinder Flange Mount 7/8"](https://p1australia.com/product/wilwood-compact-master-cylinder-flange-mount-7-8/) - Compact Remote Master Cylinder 7/8" bore 3/8-24 outlet Aluminium Black E-coated housing Reservoir mounting options included in kit
- [Wilwood Compact Master Cylinder Flange Mount 1"](https://p1australia.com/product/wilwood-compact-master-cylinder-flange-mount-1/) - Compact Remote Master Cylinder 1" bore 1/8 NPT outlet Aluminium Black E-coated housing Reservoir mounting options included in kit
- [Wilwood Compact Master Cylinder Side Mount 1"](https://p1australia.com/product/wilwood-compact-master-cylinder-side-mount-1/) - Compact Remote Master Cylinder 1" bore 1/8 NPT outlet Aluminium Black E-coated housing Reservoir mounting options included in kit
- [BLACK Ti Flanged hex head bolt 7/16-14 x 1.75"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-7-16-14-x-1-75/) - 7/16-14 thread 1/2” Flanged hex head 1.750” length 1.250” thread length Hex head drilled for lock wire Application: Sprint inboard brake caliper mount
- [Wheel Wrench Midget 31](https://p1australia.com/product/wheel-wrench-midget-31/) - 2-1/4" hex 2-5/8" hexSuits 31 spline axles 6 point socket Aluminium Black anodized
- [Rod End nut STEEL 1/2" LH](https://p1australia.com/product/rod-end-nut-steel-1-2-lh/) - 1/2"-20 LH thread 3/4" hex 3/8" height BLACK steel
- [Rod End 2pc injected nylon 1/2" x 5/8"](https://p1australia.com/product/rod-end-2pc-injected-nylon-1-2-x-5-8/) - 1/2 hole 5/8-18 thread RH thread 4130 Cro-moly
- [Rod End 2pc injected nylon 1/2" x 5/8" LH](https://p1australia.com/product/rod-end-2pc-injected-nylon-1-2-x-5-8-lh/) - P1 rod end features Precision ground hard chrome plated 52100 bearing steel ball. 4130 cro-moly heat treated steel Self sealing and lubricating Injection molded nylon These are the ULTIMATE in strength
- [Rod End 2pc injected nylon 1/2" x 1/2" LH](https://p1australia.com/product/rod-end-2pc-injected-nylon-1-2-x-1-2-lh/) - 1/2 hole 1/2-20 thread LH thread 4130 Cro-moly BLACK coated
- [Rear End Breather](https://p1australia.com/product/rear-end-breather/) - '-6 o-ring port fitting 90* push lock fitting 400mm length breather hose Suitable for Winters and DMI rear ends
- [200 Series Engine Heater](https://p1australia.com/product/200-series-engine-heater/) - 110v Heater only 1500w Suitable for all size engines
- [200 Series Engine Heater Bracket](https://p1australia.com/product/200-series-engine-heater-bracket/) - Use with HP110R 200 Series engine heater Black powder coated Aluminium
- [Wheel Wrench Sprint](https://p1australia.com/product/wheel-wrench-sprint/) - 3 axle sleeves included 6 point socket Aluminium Black anodized
- [Hub Seal](https://p1australia.com/product/hub-seal/) - Fits popular direct mount front hubs Nitrile single lip seal 1.625" ID 2.629" OD 0.250" width
- [-8 Dust Boot](https://p1australia.com/product/8-dust-boot/) - Suits -8 fittings Replacement boot for P1 engine heater kit Sold individually
- [Rue Clip 1/2"](https://p1australia.com/product/rue-clip-1-2/) - 1/2" rue clip Sold individually
- [Rue Clip 3/8"](https://p1australia.com/product/rue-clip-3-8/) - 3/8" rue clip Sold individually
- [Material Shock cover](https://p1australia.com/product/material-shock-cover/) - 7" shock cover Velcro attachment Sold as a pair
- [Rubber Shock cover](https://p1australia.com/product/rubber-shock-cover/) - 7" shock cover Sold as a pair Black colour
- [SCHROEDER Torsion bar MIDGET](https://p1australia.com/product/schroeder-torsion-bar-midget/) - 48 Spline 1" bushing size Tubular torsion bar Select length & Size Use with #TB1RET Torsion bar retainer
- [Stagger Tape](https://p1australia.com/product/stagger-tape/) - 120" length 1/4" wide 1/16" increments Plastic case Easy to read
- [Wilwood Dynalite Caliper Brake Pads](https://p1australia.com/product/wilwood-dynalite-caliper-brake-pads/) - 3.96" Width 2.21" Height 0.60" Thickness BP40 compound 1300+F temperature range Suitable for use with Wilwood Narrow Billet Dynalite caliper Sold as a pair (2 pads)
- [Wilwood Dynapro/Dynalite Single Caliper Brake Pads](https://p1australia.com/product/wilwood-dynapro-dynalite-single-caliper-brake-pads/) - 1.98" Width 2.32" Height 0.500" Thickness BP40 compound 700-800F temperature range Suitable for use with Wilwood Dynapro/Dynalite caliper Sold as a pair (2 pads)
- [Wilwood Rotor 10.2" Aluminium](https://p1australia.com/product/wilwood-rotor-10-2-aluminium/) - 10.2" rotor diameter 0.31" rotor width 5" rotor bolt circle 0.516" mounting holes Aluminium Type III hard anodized Suit : Sprint and Midget
- [Ignition Box Mounting Kit](https://p1australia.com/product/ignition-box-mounting-kit/) - 3pc Lightweight ignition box mounting kit Dzus wires installed Aluminium Black anodized
- [15" Mudcover](https://p1australia.com/product/15-mudcover/) - 6 hole mudcover Suit Weld wheels Aluminium Black anodized
- [Torque Tube Midget 30"](https://p1australia.com/product/torque-tube-midget-30/) - Complete Assembly 2.300" diameter Aluminium Black anodized
- [Injector Breather Kit](https://p1australia.com/product/injector-breather-kit/) - Fuel Injector Down Nozzle breather Kit 1/8-NPT thread Supplied as a 8 piece kit
- [3pc Rod End STEEL 3/8" x 3/8"](https://p1australia.com/product/3pc-rod-end-3-8/) - 3/8” x 3/8” thread Right hand thread Black colour
- [3pc Rod End STEEL 3/8" x 3/8" LH](https://p1australia.com/product/3pc-rod-end-steel-3-8-x-3-8-lh/) - 3/8” x 3/8” thread Left hand thread Black colour
- [3pc Rod End STEEL 7/16" x 7/16"](https://p1australia.com/product/3pc-rod-end-steel-7-16-x-7-16/) - 7/16” x 7/16” thread Right hand thread Black colour
- [3pc Rod End STEEL 7/16" x 7/16" LH](https://p1australia.com/product/3pc-rod-end-steel-7-16-x-7-16-lh/) - 7/16” x 7/16” thread Left hand thread Black colour
- [Billet Steering Arm Midget](https://p1australia.com/product/billet-steering-arm-midget/) - 2 x 7/16-20 threads 3" bolt centre 5" effective length Black anodized Application: Midget Upper steering arm
- [Billet Steering Arm Midget Lower](https://p1australia.com/product/billet-steering-arm-midget-lower/) - 2 x 7/16-20 threads 3" bolt centre 4.25/5.25" adjustable effective length Black anodized Application: Midget Lower steering arm
- [7/8" Nylon torsion bush](https://p1australia.com/product/7-8-nylon-torsion-bush/) - 7/8" inside diameter 1.090" outside diameter 0.900" length
- [1-1/8" Nylon torsion bush](https://p1australia.com/product/1-1-8-nylon-torsion-bush/) - 1-1/8" inside diameter 1.320" outside diameter 1.225" length
- [AN Wrench kit](https://p1australia.com/product/an-wrench-kit/) - 2pc AN wrench kit -6 / -8 -10 / -12 Aluminium Black anodised
- [Tie Rod Spacer](https://p1australia.com/product/tie-rod-spacer/) - 1/2" ID 0.870" OD 0.350" Height Aluminium Black Anodized
- [Axle Spacer Kit 31spl 10pcs](https://p1australia.com/product/axle-spacer-kit-31spl-10pcs/) - 10pc axle spacer kit 31 spline axle 6 inner spacers - 4 x 1/2", 1 x 1-1/2", 1 x 2" 4 outer spacers - 1 x 2-1/2", 1 x 2", 1 x 1-1/2", 1 x 1"
- [Axle Spacer Kit 36spl 10pcs](https://p1australia.com/product/axle-spacer-kit-36spl-10pcs/) - 10pc axle spacer kit 36 spline axle 6 inner spacers - 4 x 1/2", 1 x 1-1/2", 1 x 2" 4 outer spacers - 1 x 2-1/2", 1 x 2", 1 x 1-1/2", 1 x 1"
- [Axle Spacer Kit 31spl 4pcs 1/2"](https://p1australia.com/product/axle-spacer-kit-31spl-4pcs/) - 4pc axle spacer kit 31 spline axle 4 x 1/2" spacers
- [25lbs Helper Coil Spring](https://p1australia.com/product/25lbs-helper-coil-spring/) - 25lbs 1-7/8" ID 4" length Use with Part #BHSS
- [50lbs Helper Coil Spring](https://p1australia.com/product/50lbs-helper-coil-spring/) - 50lbs 1-7/8" ID 4" length Use with Part #BHSS
- [King Pin Nut](https://p1australia.com/product/king-pin-cap/) - Aluminium King Pin nut 5/8"-18 thread Black Anodized
- [BLACK Ti Sprint Header Stud Kit](https://p1australia.com/product/black-ti-sprint-header-stud-kit/) - 14pc KIT 3/8-16 – 3/8-24 threads 5/32” Allen hex 1.250” length Application: Sprint header kit
- [BLACK Ti ONS Sprint Shock Kit](https://p1australia.com/product/black-ti-ons-sprint-shock-kit/) - 8pc KIT ½-20 threads 2pcs TST1227375 2pcs TST1230875 2pcs TST1232125 2pcs TST1239625 Application: Sprint Shock stud kit
- [Rue Clip Kit 1/2"](https://p1australia.com/product/rue-clip-kit-1-2/) - 10pc KIT ½” Rue Clip
- [Rue Clip Kit 3/8"](https://p1australia.com/product/rue-clip-kit-3-8/) - 10pc KIT 3/8” Rue Clip
- [BLACK Ti Midget Steer Arm Kit](https://p1australia.com/product/black-ti-midget-steer-arm-kit/) - 6pc KIT 7/16-20 threads 4 Hex bolts / 2 countersunk bolts Application: Midget Steer Arm kit
- [BLACK Ti Draglink Kit](https://p1australia.com/product/black-ti-draglink-kit/) - 4pc KIT ½-20 threads 4 Button head bolts 4 flanged nyloc nuts 4 alum spacers Application: Sprint/Midget Drag link/Tie Rod kit
- [BLACK Ti LF Brake Rotor Kit](https://p1australia.com/product/black-ti-lf-brake-rotor-kit/) - 3pcs KIT ½-20 threads 3pcs ½ x 0.073” Countersunk Application: Sprint/Midget LF brake rotor
- [BLACK Ti Direct Mount Hub Kit Countersunk](https://p1australia.com/product/black-ti-direct-mount-hub-kit-countersunk/) - 10pcs KIT 3/8-16 threads 10pcs TB3815CS 10pcs TN3816F916 Application: Sprint/Midget Direct Mount Front Hub
- [BLACK Ti Direct Mount Hub Kit Button head](https://p1australia.com/product/black-ti-direct-mount-hub-kit-buttonhead/) - 10pcs KIT 3/8-16 threads 10pcs TB38146BH 10pcs TN3816F916 Application: Sprint/Midget Direct Mount Front Hub
- [BLACK Ti Fuel Cell Top Plate Kit](https://p1australia.com/product/black-ti-fuel-cell-top-plate-kit/) - 12pc KIT ¼-28 thread Application: Sprint/Midget Fuel Cell Top Plate
- [BLACK Ti Nerf Bar Kit Sprint](https://p1australia.com/product/black-ti-nerf-bar-kit/) - 12pc KIT 12 x 10-32 hex head bolts 12 x 10-32 nylock nuts Application: Sprint Nerf Bar Kit
- [BLACK Ti Nyloc Nut 1/2" Kit](https://p1australia.com/product/black-ti-nut-1-2-kit/) - 10pc KIT ½-20 thread Nyloc half nut 9/16 hex head Application: Universal
- [BLACK Ti Nut 3/8"-24 Kit](https://p1australia.com/product/black-ti-nut-3-8-24-kit/) - 10pc KIT 3/8-24 thread 7/16 hex head Application: Universal
- [BLACK Ti Flanged Nut 3/8"-16 Kit](https://p1australia.com/product/black-ti-flanged-nut-3-8-16-kit/) - 10pc KIT 3/8-16 thread 9/16 hex head Flanged nut Application: Sprint/Midget Direct Mount Front Hub
- [BLACK Ti Flanged Nyloc Nut 3/8"-24 Kit](https://p1australia.com/product/black-ti-flanged-nyloc-nut-3-8-24-kit/) - 10pc KIT 3/8-24 thread Nylock half nut 7/16 hex head Application: Torque tube nut
- [BLACK Ti Torque Tube Stud Kit 1.00"](https://p1australia.com/product/black-ti-torque-tube-stud-kit/) - 6pc KIT 3/8-16 – 3/8-24 threads 1.00" coarse thread length Application: Sprint Torque Tube Stud
- [BLACK Ti Hex head bolt 5/16 x 1.55"](https://p1australia.com/product/black-ti-hex-head-bolt-5-16-x-1-55/) - 5/16-18 thread ½” hex head 1.55” length Application: Micro Torsion stop adjuster bolt
- [BLACK Ti Button head bolt 3/8-16 x 1.46"](https://p1australia.com/product/black-ti-button-head-bolt-3-8-x-1-46/) - 3/8-16 thread Button head 1.460” length Full Thread Bullet nose Application: Sprint/Midget Direct Mount Front Hub Stud
- [BLACK Ti Countersunk head bolt 1/2" x 0.730"](https://p1australia.com/product/black-ti-countersunk-head-bolt-1-2-x-0-730/) - ½-20 thread Countersunk head 0.730” length Full thread length Application: Sprint/Midget LF Rotor bolt
- [BLACK Ti Flanged Hex head bolt 1/2 x 3.375"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-2-x-3-375/) - ½-20 thread 9/16” Flanged hex head 3.375” length 0.500” thread length Application: Sprint Radius Rod w/tether
- [1/2" x 2.8375" ONS](https://p1australia.com/product/1-2-x-2-8375-ons/) - 1/2-20 thread 3/4" hex with shoulder 2.8375" length Application: Midget rear lower shock
- [BLACK Ti ONS Sprint Front Lower 1/2"](https://p1australia.com/product/black-ti-ons-sprint-front-lower-1-2/) - ½-20 threads 9/16” hex flat 2.7375” overall length Application: Sprint Front Lower ONS
- [BLACK Ti ONS Sprint Rear Lower 1/2"](https://p1australia.com/product/black-ti-ons-sprint-rear-lower-1-2/) - ½-20 threads 9/16” hex flat 3.0875” overall length Application: Sprint Rear Shock Lower ONS
- [BLACK Ti ONS Sprint Rear Top 1/2"](https://p1australia.com/product/black-ti-ons-sprint-rear-top-1-2/) - ½-20 threads 9/16” hex flat 3.3375” overall length Application: Sprint Rear Shock Top, Radius Rods ONS Suit 1-5/8” Chassis Spud
- [BLACK Ti ONS Sprint Front Top 1/2"](https://p1australia.com/product/black-ti-ons-sprint-front-top-1-2/) - ½-20 threads 9/16” hex flat 4.0875” overall length Application: Sprint Front Shock Top ONS Suit 2-3/8” Chassis Spud
- [BLACK Ti Shock Stud kit 4pcs](https://p1australia.com/product/black-ti-shock-stud-kit-4pcs/) - 4pc KIT ½-20 threads 4 TST12 Studs / 4 TN12FN flanged nyloc nuts Application: Sprint/Midget Shocks, Radius rods
- [BLACK Ti Torsion Stop Micro](https://p1australia.com/product/black-ti-torsion-stop-micro/) - 7/8” spline 1-1/2” split 5/16-24 pinch bolt thread 5/16-18 adjuster thread 1/2 hex head Application: Micro/600 Torsion Stop
- [BLACK Ti Torsion Stop Midget](https://p1australia.com/product/black-ti-torsion-stop-midget/) - 1” spline 1-5/8” split 3/8-24 pinch bolt 3/8-16 adjuster bolt and nut 9/16" hex head Application: Midget Torsion Stop
- [BLACK Ti Torsion Stop Sprint](https://p1australia.com/product/black-ti-torsion-stop-sprint/) - 1-1/8” spline 1-3/4” split 3/8-24 pinch bolt 7/16-20 adjuster bolt and nut 9/16 hex heads Application: Sprint Torsion Stop
- [BLACK Ti Washer 3/8"](https://p1australia.com/product/black-ti-washer-3-8/) - 0.375" ID 0.590” OD 0.062” thick Application: Torsion pinch bolt
- [BLACK Ti Flanged Hex Nyloc Nut 3/8"](https://p1australia.com/product/black-ti-flanged-hex-nyloc-nut-3-8/) - 3/8-24 thread 7/16” Hex head Flanged Nyloc nut Application: Sprint/Midget Motor plate, Jacobs ladder strap
- [BLACK Ti Flanged Hex Nut 3/8"](https://p1australia.com/product/black-ti-flanged-hex-nut-3-8/) - 3/8-24 thread 7/16” Hex head Flanged nut Application: Sprint/Midget Header nut
- [BLACK Ti Flanged Hex Nut 3/8"x16](https://p1australia.com/product/black-ti-flanged-hex-nut-3-8x16/) - 3/8-16 thread 9/16” Hex head Flanged nut Application: Sprint Midget Direct Mount Hub Flanged nut
- [BLACK Ti Hex Nut 5/16"](https://p1australia.com/product/black-ti-hex-nut-5-16/) - 5/16-18 nut ½” hex Application: Micro Torsion stop adjuster nut
- [BLACK Ti Hex Nut 7/16"](https://p1australia.com/product/black-ti-hex-nut-7-16/) - 7/16-20 thread 9/16 hex Application: Sprint BLACK Ti torsion stop adjuster nut
- [BLACK Ti Pin 1/2" x 1.150"](https://p1australia.com/product/black-ti-pin-1-2-x-1-150/) - ½” Clevis Pin 1.115” effective length Application: Sprint/Midget Jacobs Ladder birdcage clevis pin
- [BLACK Ti Pin 3/8" x 1.150"](https://p1australia.com/product/black-ti-pin-3-8-x-1-150/) - 3/8” Clevis Pin 1.115” effective length Application: Sprint/Midget Jacobs Ladder birdcage clevis pin
- [BLACK Ti Pin 3/8" x 3.50"](https://p1australia.com/product/black-ti-pin-3-8-x-3-50/) - 3/8” Pin 3.500” effective length Application: Sprint/Midget Jacobs Ladder Chassis mount pin
- [BLACK Ti Jacobs Ladder Pin Kit 1/2"](https://p1australia.com/product/black-ti-pin-kit-1-2/) - 2pcs TP38350 1pc TP12115 2pcs RC38 1pc RC12 Use with ½” rod end in birdcage Application: Jacobs Ladder Chassis Mount Kit Sprint
- [BLACK Ti Jacobs Ladder Pin Kit 3/8"](https://p1australia.com/product/black-ti-pin-kit-3-8/) - 3pc KIT 2pcs TP38350 1pc TP38115 2pcs RC38 1pc RC12 Application: Sprint/Midget Jacobs Ladder Chassis Mount Kit Use with 3/8” rod end in birdcage
- [BLACK Ti Mudcover Stud Kit](https://p1australia.com/product/black-ti-mudcover-stud-kit/) - 3pc KIT 3 studs / 3 flanged steel nyloc nuts When a threaded fastener is required to secure mudcover. Press studs into ½” beadlock hole CHILI BOWL APPROVED
- [BLACK Ti Stud 3/8"-16-24 0.750"](https://p1australia.com/product/black-ti-stud-3-8-16-24/) - 3/8-16 – 3/8-24 thread 5/32” Allen hex 1.750” O/A length Application: Sprint/Midget torque tube stud
- [Oil Heat mat 5" wide](https://p1australia.com/product/hm-heat-mat-5-wide/) - 17-1/2" long 5" width 40" cable length Simple spring/hook attachment. All mats are Black colour. Application: Midget
- [-8 Straight O'Ring Port Fitting](https://p1australia.com/product/8-straight-oring-port-fitting/) - -8 flare / -8 o'ring port
- [-8 Straight Aluminium hose end](https://p1australia.com/product/8-straight-aluminium-hose-end/) - -8 hose end straight Use with Part #100-08 stainless steel hose or #101-08 lightweight hose
- [BLACK Ti Gas Pedal Midget](https://p1australia.com/product/black-ti-gas-pedal-midget/) - Gas Pedal 9” Application: Bullet, LynK, Spike midget chassis Developed for Keith Kunz Motorsport
- [BLACK Ti Jacobs ladder 13-3/8"](https://p1australia.com/product/black-ti-jacobs-ladder-13-3-8/) - 13-3/8” Length 3/8” clevis hole BARE FRAME Application: Spike midget
- [BLACK Ti Jacobs ladder 13-5/8" 1/2 hole](https://p1australia.com/product/black-ti-jacobs-ladder-13-5-8-1-2-hole/) - 13-5/8” Length ½” clevis hole BARE FRAME Application: Sprint/Midget
- [BLACK Ti Jacobs ladder assembly 13-5/8" LynK/Bullet](https://p1australia.com/product/black-ti-jacobs-ladder-assembly-13-5-8-bullet/) - 13-5/8” length ½” clevis hole Wide 3/8 spud BARE FRAME Application: Bullet midget chassis Developed for Keith Kunz Motorsport
- [BLACK Ti Flanged Hex Nyloc Nut 1/2"](https://p1australia.com/product/black-ti-flanged-hex-nyloc-nut-1-2/) - ½” nylock half nut 9/16” hex 0.38” height
- [-6 Lightweight Nylon Braid](https://p1australia.com/product/6-lightweight-nylon-braid/) - ID 0.34"/8.71mm OD 0.56"/14.22mm Burst Pressure 1400PSI Min bend radius 2.5"/63.5mm Sold per foot
- [-8 Lightweight Nylon Braid](https://p1australia.com/product/8-lightweight-nylon-braid/) - ID 0.44"/11.13mm OD 0.68"/17.20mm Burst Pressure 1400PSI Min bend radius 3.5"/88.9mm Sold per foot
- [-12 Lightweight Nylon Braid](https://p1australia.com/product/12-lightweight-nylon-braid/) - ID 0.69"/17.46mm OD 0.96"/24.38mm Burst Pressure 1400PSI Min bend radius 4.5"/114.3mm Sold per foot
- [BLACK Ti Flanged Drilled Hex head bolt 3/8 x 1.00"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-1-00/) - 3/8-24 thread 7/16 hex head 1.00” length Hex head drilled for lock wire Applications: Sprint/Midget LF caliper, steering box clamp, wing tree
- [BLACK Ti Countersunk head 3/8 x 1.50"](https://p1australia.com/product/black-ti-countersunk-head-3-8-x-1-50/) - 3/8-16 thread Countersunk head 1.500” O/A length Full thread length Bullet nose Application: Sprint/Midget Direct Mount Front Hub Stud
- [BLACK Ti Hex head bolt 3/8 x 1.75"](https://p1australia.com/product/black-ti-hex-head-bolt-3-8-x-1-75/) - 3/8-24 thread 1.750" length 1.000" thread length Application: Midget torsion arm pinch bolt
- [BLACK Ti Hex head bolt 3/8 x 1.875"](https://p1australia.com/product/black-ti-hex-head-bolt-3-8-x-1-875/) - 3/8-24 thread 9/16 hex head 1.875” length Application: Sprint Torsion Stop pinch bolt Alum arms, Midget Pitman arm
- [BLACK Ti Flanged Hex head bolt 3/8 x 2.375"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-3-8-x-2-375/) - 3/8-24 thread 7/16 Flanged hex head 2.375” length Application: Sprint Rear Motor plate
- [BLACK Ti Button head bolt 5/16 x 0.500"](https://p1australia.com/product/black-ti-button-head-bolt-5-16-x-0-500/) - 5/16-18 thread Dome allen head 3/16” 0.500” length Application: Sprint/Midget Steering Wheel hub
- [BLACK Ti Flanged hex head bolt 7/16 x 1.75"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-7-16-x-1-75/) - 7/16-20 thread 9/16” Flanged hex head 1.750” length 1.250” thread length Hex head drilled for lock wire Application: Midget Steer Arm
- [BLACK Ti Hex head bolt 7/16 x 1.80"](https://p1australia.com/product/black-ti-hex-head-bolt-7-16-x-1-80/) - 7/16-20 thread 9/16 hex head 1.80” length Application: Sprint BLACK Ti torsion stop adjuster
- [BLACK Ti Brake Pedal Midget](https://p1australia.com/product/black-ti-brake-pedal-spike-bullet/) - Brake Pedal Offset pivot point Knurled foot rest 14” / 2-1/4” Application: Bullet, LynK Spike Midget chassis Developed for Keith Kunz Motorsport
- [BLACK Ti Flanged Hex head drilled bolt 1/2 x 1.50"](https://p1australia.com/product/black-ti-ons-1-2-x-1-50/) - ½-20 thread 9/16” Flanged hex head 1.500” length 1.00” thread length Hex head drilled for lock wire Application: Sprint Steer Arms, Radius rods
- [BLACK Ti Countersunk bolt 1/2 x 2.00"](https://p1australia.com/product/black-ti-countersunk-bolt-1-2-x-2-00/) - 1/2-20 thread Countersunk head 2.000” length 1.375” thread length Application: Sprint Steer Arms
- [BLACK Ti Flat button head bolt 1/2 x 2.100"](https://p1australia.com/product/black-ti-flat-button-head-bolt-1-2-x-2-100/) - 1/2-20 thread Button head 2.100” length 2.000” thread length Application: Midget/Sprint Drag link, Tie Rod
- [BLACK Ti Flanged Hex head bolt 1/2 x 2.625"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-2-x-2-625/) - ½-20 thread 9/16” Flanged hex head 2.625” length 0.500” thread length Application: Sprint Radius Rod
- [BLACK Ti Hex head bolt 1/2 x 2.970"](https://p1australia.com/product/black-ti-hex-head-bolt-1-2-x-2-970/) - 1/2-20 thread ¾” Hex head 2.970” length 0.430” thread length Application: Midget Birdcage Lower Pick up bolt
- [BLACK Ti Front Axle Kit 3pcs](https://p1australia.com/product/black-ti-front-axle-kit-3pcs/) - 3pc KIT ½-20 threads 3 hex bolts / 3 flanged nyloc nuts Application: Sprint/Midget Front axle kit
- [BLACK Ti Radius Rod Kit 9pcs](https://p1australia.com/product/black-ti-radius-rod-kit-9pcs/) - 9pcs Kit ½-20 threads 6pcs ½ x 2.625 3pcs ½ x 1.250 3pcs ½ Flanged nylock nut Application: Sprint Radius Rod Kit
- [BLACK Ti Flanged Hex head bolt 1/4 x 1.00"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt-1-4-x-1-00/) - ¼-20 thread 7/16” hex head 1.000” length 0.875” thread length Application: Micro Wheels
- [Front Hub Tapered Wheel Bearing](https://p1australia.com/product/front-hub-tapered-wheel-bearing/) - P1 front hub bearing Fits most direct mount hubs Supplied with bearing and race
- [Billet Remote Coolant Mount](https://p1australia.com/product/billet-remote-coolant-mount/) - Remote coolant mount -8 threads for o'ring port fittings Black anodized
- [Billet Brake Bracket Midget](https://p1australia.com/product/billet-brake-bracket/) - 3.25" bolt spacing, 3/8-24 threads 0.375" thickness Use with 10.25" rotor Black anodized
- [BLACK 1/2 Nyloc nut kit](https://p1australia.com/product/1-2-nut-kit/) - 300pc Half Nut Kit Kit contains 50pcs each size 10-32, 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20 Supplied in plastic case With 300pcs you will not run out when building a car!
- [Billet Helper spring Sleeve](https://p1australia.com/product/billet-helper-spring-sleeve/) - Suits small body shocks 1-7/8" ID Springs 2-1/2" length
- [27" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-275/) - 27" long x 1-1/8"OD BLACK anodized
- [29" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-28/) - 29" long x 1-1/8"OD BLACK anodized
- [19-1/2" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-12/) - 19-1/2" long x 1-1/8"OD BLACK anodized
- [18-1/2" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-185/) - 18-1/2" long x 1-1/8"OD BLACK anodized
- [18" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-18/) - 18" long x 1"OD BLACK anodized
- [19" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-19/) - 19" long x 1-1/8"OD BLACK anodized
- [21-1/2" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-215/) - 21-1/2" long x 1-1/8"OD BLACK anodized
- [22-1/2" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-225/) - 22-1/2" long x 1-1/8"OD BLACK anodized
- [-8 Red Aluminium Quick Disconnect](https://p1australia.com/product/8-red-aluminium-quick-disconnect/) - -8 Quick Release Fitting Complete Use with Part #BRCM to complete your remote engine heating system.
- [31" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-31/) - 31" long x 1-1/8"OD BLACK anodized
- [39" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-39/) - 39" long x 1-1/8"OD BLACK anodized
- [40" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-40/) - 40" long x 1-1/8"OD BLACK anodized
- [41" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-41/) - 41" long x 1-1/8"OD BLACK anodized
- [BLACK Ti Flanged Hex head bolt 10-32 x 1.00"](https://p1australia.com/product/10-32-titanium-bolt-3/) - 10-32 thread 3/8” hex head 1.000” length
- [BLACK Ti Hex head bolt 10-32 x 1.500"](https://p1australia.com/product/10-32-titanium-bolt-2/) - 10-32 thread 3/8” hex head 1.500” length Applications; Sprint nerf / bumper
- [BLACK Ti Hex head bolt 1/4 x 0.875"](https://p1australia.com/product/black-ti-hex-head-bolt/) - ¼-28 thread 7/16” hex head 1.000” length Full thread length Applications; Fuel cell top plate
- [BLACK Ti Flanged Hex head bolt 3/8 x 1.70"](https://p1australia.com/product/black-ti-hex-head-bolt-4/) - 3/8-24 thread 7/16” hex head 1.700” length 0.350” thread length Applications; Jacobs Ladder strap
- [3/8 x 1.600" Titanium bolt](https://p1australia.com/product/38-titanium-bolt/) - 3/8 UNC x 1.9375" Full thread Applications; Torsion adjuster Midget/speedcar
- [BLACK Aluminium nut 3/8](https://p1australia.com/product/black-aluminium-nut/) - 3/8 UNC black anodized aluminium nut Applications; Midget Torsion stop adjuster bolt TB3816ADJ
- [BLACK Ti Hex head bolt 5/16 x 0.75"](https://p1australia.com/product/black-ti-hex-head-bolt-3/) - 5/16-24 thread 1/2" hex head 0.750" length Full thread length Applications; Sprint / Midget Direct mount wheel halves, wheel centre
- [BLACK Ti Hex head bolt 5/16 x 1.00"](https://p1australia.com/product/black-ti-hex-head-bolt-2/) - 5/16-18 thread ½” hex head 1.00” length Captive washer Applications; Sprint / Midget Beadlock bolt
- [7/16 x 0.875" Titanium bolt Hex Head](https://p1australia.com/product/titanium-bolt-hex-head/) - 4pc Kit 7/16”-20TPI Jet head 0.875” length Applications; Crank u-joint
- [BLACK Ti Countersunk bolt 7/16 x 2.00"](https://p1australia.com/product/black-ti-countersunk-bolt/) - 7/16-20 thread Countersunk head 2.000” length 1.000” thread length Applications; Midget Steer Arm
- [BLACK Ti Flanged Hex head bolt 1/2 x 1.250"](https://p1australia.com/product/black-ti-flanged-hex-head-bolt/) - ½-20 thread 9/16” Flanged hex head 1.250” length 0.625” thread length Applications; Sprint/Midget Front axle
- [BLACK Ti ONS 1/2 x 2.0875"](https://p1australia.com/product/titanium-stud/) - 1/2" UNF stud 2.090" length 9/16" flats 5/32" hex machined into back of stud Applications; Shock & radius rod
- [BLACK Ti King Pin Midget](https://p1australia.com/product/titanium-king-pin-2/) - 0.812" diameter 4.715" length Pin and nut supplied Application:Midget / Speedcar *Please note that spindle bushes may require reaming to fit.*
- [200 Series Remote Engine Heater Kit](https://p1australia.com/product/200-series-remote-engine-heater-kit/) - 200 Series Engine heater kit comes complete with; 200 Series Engine Heater Heater mounting bracket 2 x -8 heater hoses with fittings 2 x -8 Quick release fittings 2 x -8 dust plugs 1 x Billet Remote Mounting Bracket 2 x -8 O-ring port fittings
- [Rod End nut STEEL 5/8" LH](https://p1australia.com/product/rod-end-nut-steel/) - 5/8"-18 LH thread 3/4" hex 3/8" height BLACK steel
- [Rod End nut STEEL 5/8"](https://p1australia.com/product/rod-end-nut-steel-3/) - 5/8"-18 RH thread 3/4" hex 3/8" height BLACK steel
- [Rod End nut STEEL 1/2"](https://p1australia.com/product/rod-end-nut-steel-2/) - 1/2"-20 RH thread 3/4" hex 3/8" height BLACK steel
- [23-1/2" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-235/) - 23-1/2" long x 1-1/8"OD BLACK anodized
- [23" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-23/) - 23" long x 1-1/8"OD BLACK anodized
- [24" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-24/) - 24" long x 1-1/8"OD BLACK anodized
- [29.5" Aluminium swaged rod](https://p1australia.com/product/aluminium-swaged-rod-29/) - 29.5" long x 1-1/8"OD
- [Rod End 2pc injected nylon 3/8" x 5/8"](https://p1australia.com/product/38-x-58-male-rod-end/) - 3/8 hole 5/8-18 thread RH thread BLACK anodized
- [Rod End 2pc injected nylon 1/2" x 1/2"](https://p1australia.com/product/rod-end-2pc-injected-nylon/) - 1/2 hole 1/2-20 thread RH thread 4130 Cro-moly BLACK coated
- [-3 Black Aluminium Quick Disconnect](https://p1australia.com/product/3-black-aluminium-quick-disconnect/) - '-3 Quick Release Fitting Complete Use with Part #131-03 or 133-03 couplers to adapt to your brake line.
- [-8 Blue Aluminium Quick Disconnect](https://p1australia.com/product/8-blue-aluminium-quick-disconnect/) - -8 Quick Release Fitting Complete Use with Part #BRCM to complete your remote engine heating system.
- [Billet Birdcage Set Midget 36 spline](https://p1australia.com/product/billet-birdcage-midget-left/) - 36 Spline Birdcage set Complete with double row bearings, splined inserts, grease nipples & BLACK Ti lower pick up bolt. BLACK anodized.
- [Billet Birdcage Set Midget 31 spline](https://p1australia.com/product/billet-birdcage-midget-right/) - 31 Spline Birdcage set Complete with double row bearings, splined inserts, grease nipples & BLACK Ti lower pick up bolt. BLACK anodized.
- [28mm Double row bearing](https://p1australia.com/product/28mm-double-row-bearing/) - Replacement bearing for P1 billet birdcages. Double Row Angular bearing 100 x 70 x 28mm Common inner and outer races Outer groove ring to allow external oiling
- [Birdcage spiral lock](https://p1australia.com/product/birdcage-spiral-lock/) - Replacement spiral lock for P1 billet birdcages.
- [1" Nylon torsion bush](https://p1australia.com/product/billet-1-bronze-torsion-bush/) - 1" inside diameter 1.177" outside diameter 1.108" length
- [Billet Valve cover](https://p1australia.com/product/billet-valve-cover/) - Fits Chev 12° to 23° cylinder heads Sold as a pair. Black anodized.
- [SSH2 Stainless Steel Sprint headers](https://p1australia.com/product/stainless-steel-sprint-headers/) - 1-7/8" - 2" Primary pipes 3-1/2" outlet Swept forward design for additional muffler clearance Sold as a PAIR only
- [Oil Heat mat Stick on Small](https://p1australia.com/product/9398/) - 14″ x 3-1/2″ 165w 110v USA plug 2" length cable Super strong 3M adhesive allows the mat to easily stick to the oil pan. Designed to suit BEAST pavement Silver Crown, Sprint or Midget oil tank. All mats are Black colour
- [Racers Insurance](https://p1australia.com/product/racers-insurance/) - STIDA is a leader in insurance for Racers. Protect yourself and your family in the event of an accident. Click the link below to redirect to the official STIDA website. STIDA – stida.com

## Store Locator

- [ISA-RACING GMBH](https://p1australia.com/stores/isa-racing-gmbh/)
- [Farrell FrameWorks](https://p1australia.com/stores/farrell-frameworks/)
- [SEYMOUR PERFORMANCE](https://p1australia.com/stores/seymour-performance/)
- [DKR MOTORSPORTS](https://p1australia.com/stores/dkr-motorsports/)
- [A.R.T. ENTERPRISES](https://p1australia.com/stores/a-r-t-enterprises/)
- [1 WAY PERFORMANCE INC](https://p1australia.com/stores/1-way-performance-inc/)
- [BSL Racing Ltd](https://p1australia.com/stores/bsl-racing-ltd/)
- [Maxwill Racing Engines](https://p1australia.com/stores/maxwill-racing-engines/)
- [Edge Parts & Performance](https://p1australia.com/stores/edge-parts-performance/)
- [The Speedway Shop](https://p1australia.com/stores/the-speedway-shop/)
- [DRIVEN  PERFORMANCE](https://p1australia.com/stores/driven-performance/)
- [KAEDING PERFORMANCE INC](https://p1australia.com/stores/kaeding-performance-inc/)
- [BEAST  ENTERPRISES  INC](https://p1australia.com/stores/beast-enterprises-inc/)
- [BENIC  ENTERPRISES](https://p1australia.com/stores/benic-enterprises/)
- [COMPETITION  SUSPENSION  INC](https://p1australia.com/stores/competition-suspension-inc/)
- [HOOSIER  TIRE  MIDWEST](https://p1australia.com/stores/hoosier-tire-midwest/)
- [Australian Racing Products](https://p1australia.com/stores/australian-racing-products/)
- [Driven Performance Midwest](https://p1australia.com/stores/driven-performance-midwest/)
- [Car & Fleet Parts](https://p1australia.com/stores/car-fleet-parts/)
- [Kistler Racing Products](https://p1australia.com/stores/kistler-racing-products/)
- [Jockos Sprint Parts](https://p1australia.com/stores/jockos-sprint-parts/)
- [WEM  PERFORMANCE  RACE COMPONENTS](https://p1australia.com/stores/wem-performance-race/)
- [TEN-J CHASSIS](https://p1australia.com/stores/ten-j-chassis/)
- [MAXWELL  INDUSTRIES](https://p1australia.com/stores/maxwell-industries/)
- [Kendrick Automotives](https://p1australia.com/stores/kendrick-automotives/)
- [KRE Race Engines Pty Ltd](https://p1australia.com/stores/kre-race-engines-pty-ltd/)
- [INDY  RACE  PARTS](https://p1australia.com/stores/indy-race-parts/)
- [KEITH  KUNZ  MOTORSPORTS](https://p1australia.com/stores/keith-kunz-motorsports/)
- [KREITZ OVAL  TRACK  PARTS  INC](https://p1australia.com/stores/kreith-oval-track-parts-inc/)
- [SCOTT  BAYLOR  RACING  ENGINES  LLC](https://p1australia.com/stores/scott-baylor-racing-engines-llc/)
- [GRASMERE PERFORMANCE USA](https://p1australia.com/stores/grasmere-performance-usa/)

## Categories

- [Uncategorized](https://p1australia.com/category/uncategorized/)

## Product categories

- [AN Hose, Fittings, Filters](https://p1australia.com/product-category/an-hose-fittings-filters/)
- [Jacobs Ladder](https://p1australia.com/product-category/rear-end-components/jacobs-ladder/)
- [Oil Tanks](https://p1australia.com/product-category/oil-tanks/)
- [Rod ends](https://p1australia.com/product-category/rod-ends/)
- [Aluminium](https://p1australia.com/product-category/rod-ends/aluminium/)
- [Radius Rods](https://p1australia.com/product-category/radius-rods/)
- [BLACK Ti](https://p1australia.com/product-category/black-ti/)
- [3/8"](https://p1australia.com/product-category/black-ti/3-8/)
- [7/16](https://p1australia.com/product-category/fasteners/titanium-natural/7-16-titanium/)
- [1/2"](https://p1australia.com/product-category/black-ti/1-2/)
- [Studs / Pins](https://p1australia.com/product-category/black-ti/studs-pins/)
- [King Pins](https://p1australia.com/product-category/black-ti/king-pins/)
- [Engine Heaters](https://p1australia.com/product-category/engine-heaters/)
- [Lightweight nylon braid](https://p1australia.com/product-category/an-hose-fittings-filters/lightweight-nylon-braid/)
- [Tools](https://p1australia.com/product-category/tools/)
- [Quick Release Fittings](https://p1australia.com/product-category/an-hose-fittings-filters/quick-release-fittings/)
- [Engine Accessories](https://p1australia.com/product-category/engine-accessories/)
- [Headers](https://p1australia.com/product-category/headers/)
- [Sprintcar](https://p1australia.com/product-category/headers/sprintcar/)
- [Oil Heat mat](https://p1australia.com/product-category/oil-heat-mat/)
- [Steel](https://p1australia.com/product-category/rod-ends/steel/)
- [10-32"](https://p1australia.com/product-category/black-ti/10-32/)
- [1/4"](https://p1australia.com/product-category/black-ti/1-4/)
- [3/8](https://p1australia.com/product-category/fasteners/titanium-natural/3-8-titanium/)
- [5/16"](https://p1australia.com/product-category/black-ti/5-16/)
- [7/16"](https://p1australia.com/product-category/black-ti/7-16/)
- [Racing Wheels](https://p1australia.com/product-category/racing-wheels/)
- [Coil Springs](https://p1australia.com/product-category/coil-springs/)
- [Driveline](https://p1australia.com/product-category/driveline/)
- [Heater accessories](https://p1australia.com/product-category/engine-heaters/heater-accessories/)
- [200 Series](https://p1australia.com/product-category/engine-heaters/200-series/)
- [Front End Components](https://p1australia.com/product-category/front-end-components/)
- [Fasteners](https://p1australia.com/product-category/fasteners/)
- [Oil Tank Accessories](https://p1australia.com/product-category/oil-tanks/oil-tank-accessories/)
- [Rear End Components](https://p1australia.com/product-category/rear-end-components/)
- [Shock Absorbers and Components](https://p1australia.com/product-category/shock-absorbers-and-components/)
- [Titanium Natural](https://p1australia.com/product-category/fasteners/titanium-natural/)
- [1/2](https://p1australia.com/product-category/fasteners/titanium-natural/1-2-titanium/)
- [Birdcages](https://p1australia.com/product-category/rear-end-components/birdcages/)
- [Torsion Bushes](https://p1australia.com/product-category/rear-end-components/torsion-bushes/)
- [Wheel Accessories](https://p1australia.com/product-category/racing-wheels/wheel-accessories/)
- [Pedals](https://p1australia.com/product-category/black-ti/pedals/)
- [Jacobs Ladders](https://p1australia.com/product-category/black-ti/jacobs-ladders/)
- [AN Hose ends](https://p1australia.com/product-category/an-hose-fittings-filters/an-hose-ends/)
- [0'ring port](https://p1australia.com/product-category/an-hose-fittings-filters/oring-port/)
- [Nuts](https://p1australia.com/product-category/black-ti/nuts/)
- [Kits](https://p1australia.com/product-category/black-ti/kits/)
- [Torsion Stops](https://p1australia.com/product-category/black-ti/torsion-stops/)
- [-8](https://p1australia.com/product-category/an-hose-fittings-filters/an-hose-ends/8/)
- [Header/Muffler accessories](https://p1australia.com/product-category/headers/header-muffler-accessories/)
- [Torsion Stops](https://p1australia.com/product-category/rear-end-components/torsion-stops-rear-end-components/)
- [Torsion Arms](https://p1australia.com/product-category/rear-end-components/torsion-arms/)
- [Spacers](https://p1australia.com/product-category/rear-end-components/spacers/)
- [Torque Tubes](https://p1australia.com/product-category/rear-end-components/torque-tubes/)
- [Torsion Bars](https://p1australia.com/product-category/rear-end-components/torsion-bars/)
- [Brakes](https://p1australia.com/product-category/brakes/)
- [Steering](https://p1australia.com/product-category/steering/)
- [Protective Covers](https://p1australia.com/product-category/shock-absorbers-and-components/protective-covers/)
- [Shock Accessories](https://p1australia.com/product-category/shock-absorbers-and-components/shock-accessories/)
- [Fasteners](https://p1australia.com/product-category/front-end-components/fasteners-front-end-components/)
- [King Pins](https://p1australia.com/product-category/front-end-components/king-pins-front-end-components/)
- [Torsion Stops](https://p1australia.com/product-category/front-end-components/torsion-stops-front-end-components/)
- [Hubs & Accessories](https://p1australia.com/product-category/front-end-components/hubs-accessories/)
- [Spindles](https://p1australia.com/product-category/front-end-components/spindles/)
- [Rear End](https://p1australia.com/product-category/rear-end-components/rear-end/)
- [Fasteners](https://p1australia.com/product-category/rear-end-components/fasteners-rear-end-components/)
- [Tire Bleeder Accessories](https://p1australia.com/product-category/tire-bleeder-accessories/)
- [Mufflers](https://p1australia.com/product-category/headers/mufflers/)
- [Master Cylinders](https://p1australia.com/product-category/brakes/master-cylinders/)
- [Calipers](https://p1australia.com/product-category/brakes/calipers/)
- [Brake Rotors](https://p1australia.com/product-category/brakes/brake-rotors/)
- [Brake Pads / Accessories](https://p1australia.com/product-category/brakes/brake-pads-accessories/)
- [Chassis Parts](https://p1australia.com/product-category/chassis-parts/)
- [Racers Insurance](https://p1australia.com/product-category/racers-insurance/)
- [Lubricants](https://p1australia.com/product-category/lubricants/)
- [Thread lubricant](https://p1australia.com/product-category/black-ti/thread-lubricant/)
- [Radius Rod Kits](https://p1australia.com/product-category/radius-rods/radius-rod-kits/)
- [Magnetic Drain plugs](https://p1australia.com/product-category/an-hose-fittings-filters/magnetic-drain-plugs/)
- [Core / Freeze Plugs](https://p1australia.com/product-category/an-hose-fittings-filters/core-freeze-plugs/)
- [2000 Series](https://p1australia.com/product-category/engine-heaters/2000-series-engine-heaters/)
- [3/8 x 3/4 OD](https://p1australia.com/product-category/radius-rods/3-8-x-3-4-od/)
- [7/16" x 7/8" OD](https://p1australia.com/product-category/radius-rods/7-16-x-7-8-od/)
- [5/8" x 1-1/8" OD](https://p1australia.com/product-category/radius-rods/5-8-x-1-1-8-od/)
- [5/8" x 1" OD](https://p1australia.com/product-category/radius-rods/5-8-x-1-od/)
- [Thermal Heating Blankets / Covers](https://p1australia.com/product-category/thermal-heatin-blankets-covers/)
- [Gaskets](https://p1australia.com/product-category/headers/gaskets/)
- [Chassis Bolt Kits](https://p1australia.com/product-category/black-ti/complete-chassis-bolt-kits/)

## Product tags

- [radius rods](https://p1australia.com/product-tag/radius-rods/)
- [rod ends](https://p1australia.com/product-tag/rod-ends/)
- [kit](https://p1australia.com/product-tag/kit/)
- [radius rod](https://p1australia.com/product-tag/radius-rod/)
- [rod end](https://p1australia.com/product-tag/rod-end/)
- [tie rod](https://p1australia.com/product-tag/tie-rod/)
- [draglink](https://p1australia.com/product-tag/draglink/)
- [wilwood](https://p1australia.com/product-tag/wilwood/)
- [brakes](https://p1australia.com/product-tag/brakes/)
- [sprint](https://p1australia.com/product-tag/sprint/)
- [midget](https://p1australia.com/product-tag/midget/)
- [caliper](https://p1australia.com/product-tag/caliper/)
- [pads](https://p1australia.com/product-tag/pads/)
- [master cylinder](https://p1australia.com/product-tag/master-cylinder/)
- [headers](https://p1australia.com/product-tag/headers/)
- [stainless](https://p1australia.com/product-tag/stainless/)
- [305](https://p1australia.com/product-tag/305/)
- [410](https://p1australia.com/product-tag/410/)
- [header](https://p1australia.com/product-tag/header/)
- [heater](https://p1australia.com/product-tag/heater/)
- [engineheaters](https://p1australia.com/product-tag/engineheaters/)
- [diesel](https://p1australia.com/product-tag/diesel/)
- [engine heat](https://p1australia.com/product-tag/engine-heat/)
- [torsionarms](https://p1australia.com/product-tag/torsionarms/)
- [billet](https://p1australia.com/product-tag/billet/)
- [spline](https://p1australia.com/product-tag/spline/)
- [steeringbox](https://p1australia.com/product-tag/steeringbox/)
- [halfbox](https://p1australia.com/product-tag/halfbox/)
- [mounts](https://p1australia.com/product-tag/mounts/)
- [steeringgear](https://p1australia.com/product-tag/steeringgear/)
- [radiusrod](https://p1australia.com/product-tag/radiusrod/)
- [aluminium](https://p1australia.com/product-tag/aluminium/)
- [micro](https://p1australia.com/product-tag/micro/)

## Store Categories

- [USA](https://p1australia.com/store-category/usa/)
- [Australia](https://p1australia.com/store-category/australia/)
- [Germany](https://p1australia.com/store-category/germany/)